ProcessOntology
- Version
- 1.0
- Created
- 2023
Classes 480 RDF Properties 295 Object Properties 325 Datatype Properties 317
Overview
Classes
ElasticConstantC44
https://w3id.org/steel/ProcessOntology/ElasticConstantC44
- description
- "Elastic constant to describe the anisotropic elastic material behaviour" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasElasticConstantC44
MinimumCrosssectionAfterFracture
https://w3id.org/steel/ProcessOntology/MinimumCrosssectionAfterFracture
- description
- "minimum cross-sectional area after fracture" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasMinimumCrosssectionAfterFracture
Model
https://w3id.org/steel/ProcessOntology/Model
ElasticConstantC12
https://w3id.org/steel/ProcessOntology/ElasticConstantC12
- description
- "Elastic constant to describe the anisotropic elastic material behaviour" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasElasticConstantC12
stand
https://w3id.org/steel/ProcessOntology/stand
MildSteel
https://w3id.org/steel/ProcessOntology/MildSteel
Pyiron project
https://w3id.org/steel/ProcessOntology/PyironProject
A frame where all pyiron jobs are done on top of this frame. It encloses a number of jobs. It also provides utility functions for creatig python objects for these jobs.
- is in domain of
- has job
SampleInfos
https://w3id.org/steel/ProcessOntology/SampleInfos
MeasuringDevice
https://w3id.org/steel/ProcessOntology/MeasuringDevice
ThermalConductivity
https://w3id.org/steel/ProcessOntology/ThermalConductivity
YieldForce_0.2Percentage
https://w3id.org/steel/ProcessOntology/YieldForce_0.2Percentage
SampleType
https://w3id.org/steel/ProcessOntology/SampleType
- description
- "The general type of the specimen." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasSampleType
ShearLengthAfterFracture1
https://w3id.org/steel/ProcessOntology/ShearLengthAfterFracture1
AlloyDevelopment
https://w3id.org/steel/ProcessOntology/AlloyDevelopment
HardeningParameterTau0
https://w3id.org/steel/ProcessOntology/HardeningParameterTau0
- description
- "Hardening parameter used in Voce-type hardening law of the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasHardeningParameterTau0
BlankHolderForce
https://w3id.org/steel/ProcessOntology/BlankHolderForce
- description
- "Draw-in shall be prevented as much as possible" [DIN EN ISO 12004-2: 2021_07, 5]
- has super-classes
- ValueObject
- is in range of
- hasBlankHolderForce
EulerAngle1
https://w3id.org/steel/ProcessOntology/EulerAngle1
- description
- "One of three euler angles that are introduced by Leonhard Euler to describe the orientation of a rigid body with respect to a fixed coordinate system" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEulerAngle1
TestingRate
https://w3id.org/steel/ProcessOntology/TestingRate
FailureStrainIdentifier4StrainRate
https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier4StrainRate
- description
- Load curve ID defining plastic failure strain as a function of plastic strain rate
- has super-classes
- ValueObject
- is in range of
- hasFailureStrainIdentifier4StrainRate
EulerAngleConvention
https://w3id.org/steel/ProcessOntology/EulerAngleConvention
- description
- "Convention used to describe the Euler angles, e.g. Bunge" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEulerAngleConvention
RollingDirection
https://w3id.org/steel/ProcessOntology/RollingDirection
FailureStrain
https://w3id.org/steel/ProcessOntology/FailureStrain
- description
- Failure strain curve/table or function GT.0.0: Load curve ID or table ID. As a load curve, it defines equivalent plastic strain to failure as a function of triaxiality. As a table, it defines for each Lode parameter value (between -1 and 1) a load curve ID giving the equivalent plastic strain to failure as a function of triaxiality for that Lode parameter value. With HISVN ≠ 0, a 3D table can be used, where failure strain is a function of the history variable (TABLE_3D), Lode parameter (TABLE), and triaxiality (CURVE). With HISVN = 0, a 3D table introduces thermal effects, that is, failure strain is a function of temperature (TABLE_3D), Lode parameter (TABLE), and triaxiality (CURVE). LT.0.0: |LCSDG| is the ID of a function (*DEFINE_FUNCTION) with the arguments triaxiality and Lode parameter: ?? (??, ??).
- has super-classes
- ValueObject
- is in range of
- hasFailureStrain
RelativeStandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/RelativeStandardDeviationOfTheSlope
- description
- "quotient of the standard deviation of the slope and the slope in the evaluation range, multiplied by 100 %" [DIN EN ISO 6892-1, 3.17]
- has super-classes
- ValueObject
- is in range of
- hasRelativeStandardDeviationOfTheSlope
TimeDependentEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/TimeDependentEngineeringStrainRate
- description
- "time-dependent engineering strain rate = de(t)/dt" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasTimeDependentEngineeringStrainRate
ClampingForce
https://w3id.org/steel/ProcessOntology/ClampingForce
Hill48N
https://w3id.org/steel/ProcessOntology/Hill48N
Parameter N for Hill48 yield criterion
PlasticityModel
https://w3id.org/steel/ProcessOntology/PlasticityModel
- description
- phenomenological crystal plasticity model
- has super-classes
- ValueObject
- is in range of
- hasPlasticityModel
Hockett Sherby Steady State Stress
https://w3id.org/steel/ProcessOntology/HockettSherbySteadyStateStress
Steady-state flow stress used for the flow curve extrapolation according to Hockett and Sherby (1975).
Time series
https://w3id.org/steel/ProcessOntology/TimeSeries
TestTime
https://w3id.org/steel/ProcessOntology/TestTime
- description
- "Duration from beginning of test to moment of fracture initiation" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasTestTime
TrueThicknessStrain
https://w3id.org/steel/ProcessOntology/TrueThicknessStrain
- description
- "True thickness strain received from post-processing the hydraulic bulge test." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasTrueThicknessStrain
Fracture
https://w3id.org/steel/ProcessOntology/Fracture
- description
- "phenomenon which is deemed to occur when total separation of the test piece occurs" [DIN EN ISO 6892-1, 3.11]
- has super-classes
- ValueObject
- is in range of
- hasFracture
ThermalExpansionCoefficient
https://w3id.org/steel/ProcessOntology/ThermalExpansionCoefficient
LatticeStructure
https://w3id.org/steel/ProcessOntology/LatticeStructure
- description
- "Crystall structure of the material considered" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasLatticeStructure
contact length
https://w3id.org/steel/ProcessOntology/contactLength
DeliveryDate
https://w3id.org/steel/ProcessOntology/DeliveryDate
NumberOfVirtualExperiments
https://w3id.org/steel/ProcessOntology/NumberOfVirtualExperiments
- description
- "Number of virtual experiments carried out" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasNumberOfVirtualExperiments
IndentationDiameterAverage
https://w3id.org/steel/ProcessOntology/IndentationDiameterAverage
- description
- Average Indentation Diameter
- has super-classes
- ValueObject
- is in range of
- hasIndentationDiameterAverage
SpinFinishPumpSpeed%20
https://w3id.org/steel/ProcessOntology/SpinFinishPumpSpeed%20
MicrostructureModel
https://w3id.org/steel/ProcessOntology/MicrostructureModel
- description
- "input-file describing the microstructure model for chosen solver" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasMicrostructureModel
FailureCriteriaTypeAdd
https://w3id.org/steel/ProcessOntology/FailureCriteriaTypeAdd
- description
- Flag for additional failure criterion F2: =0.0: off (default) =1.0: on; An additional, load-path independent, failure criterion can be invoked, where the current state of plastic strain is used
- has super-classes
- ValueObject
- is in range of
- hasFailureCriteriaTypeAdd
Simulation Workflow
https://w3id.org/steel/ProcessOntology/SimulationWorkflow
Experimentation
https://w3id.org/steel/ProcessOntology/Experimentation
PunchDisplacement
https://w3id.org/steel/ProcessOntology/PunchDisplacement
PermissibleUncertainty
https://w3id.org/steel/ProcessOntology/PermissibleUncertainty
- description
- Permissible Uncertainty
- has super-classes
- ValueObject
- is in range of
- hasPermissibleUncertainty
YieldingIdentifierIsoThermal
https://w3id.org/steel/ProcessOntology/YieldingIdentifierIsoThermal
- description
- Table ID defining for each temperature value a load curve ID giving the (quasi-static) effective stress versus effective plastic strain for that temperature
- has super-classes
- ValueObject
- is in range of
- hasYieldingIdentifierIsoThermal
grain orientation
https://w3id.org/steel/ProcessOntology/GrainOrientation
YieldStrength
https://w3id.org/steel/ProcessOntology/YieldStrength
- description
- "when the metallic material exhibits a yield phenomenon, stress corresponding to the point reached during the test at which plastic deformation occurs without any increase in the force" [DIN EN ISO 6892-1, 3.10.2]
- has super-classes
- ValueObject
- is in range of
- hasYieldStrength
InitialFlowStress_g0
https://w3id.org/steel/ProcessOntology/InitialFlowStress_g0
DAMASK phenopower law parameter
PercentageReductionOfArea
https://w3id.org/steel/ProcessOntology/PercentageReductionOfArea
- description
- "maximum change in cross-sectional area which has occured during the test expressed as a percentage of the original cross-sectional area" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasPercentageReductionOfArea
MatTabulatedJohnsonCookLogInterpolation
https://w3id.org/steel/ProcessOntology/MatTabulatedJohnsonCookLogInterpolation
- description
- Simple incompressible plasticity model with adiabatic approach and logarithmic interpolation
- has super-classes
- ValueObject
- is in range of
- hasMatTabulatedJohnsonCookLogInterpolation
MaterialsInformatics
https://w3id.org/steel/ProcessOntology/MaterialsInformatics
TrueWidthStrain
https://w3id.org/steel/ProcessOntology/TrueWidthStrain
- description
- "true strain in width direction" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTrueWidthStrain
DieTool
https://w3id.org/steel/ProcessOntology/DieTool
InnerDiameterDie
https://w3id.org/steel/ProcessOntology/InnerDiameterDie
- description
- "Diameter of the die (inner) of the testing machine." [DIN EN ISO 16808:2022-08, 4]
- has super-classes
- ValueObject
- is in range of
- hasInnerDiameterDie
ReferenceShearRate
https://w3id.org/steel/ProcessOntology/ReferenceShearRate
- description
- List of reference shear rate per slip family
- has super-classes
- ValueObject
- is in range of
- hasReferenceShearRate
EDX
https://w3id.org/steel/ProcessOntology/EDX
Uniform Elongation
https://w3id.org/steel/ProcessOntology/UniformElongation
Prüfgeschwindigkeit
https://w3id.org/steel/ProcessOntology/TestingRate2
Prüfgeschwindigkeit nach Umschaltpunkt
GaugeLength
https://w3id.org/steel/ProcessOntology/GaugeLength
- description
- "length of the parallel portion of the test piece on which elongation is measured at any moment during the test" [DIN EN ISO 6892-1, 3.1]
- has super-classes
- ValueObject
- is in range of
- hasGaugeLength
Pyiron Job
https://w3id.org/steel/ProcessOntology/PyironJob
execution information of a Code; can get deferred; can get executed on a batch system. A Pyiron job bundles all required metadata for a Pyiron code execution. Is similar to the context of a process from computer science.
- has sub-classes
- Script Job
- Reference Job
- has super-classes
- process
- is in domain of
- has hdf
- has a sub job
- is in range of
- has job
- has a sub job
EngineeringStress
https://w3id.org/steel/ProcessOntology/EngineeringStress
- description
- "engineering stress" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasEngineeringStress
Script Job
https://w3id.org/steel/ProcessOntology/ScriptJob
Digital workflow
https://w3id.org/steel/ProcessOntology/DigitalWorkflow
Unusual crash test
https://w3id.org/steel/ProcessOntology/UnusualCrashTest
Crashtestresults that differ from simulations
Laboratory
https://w3id.org/steel/ProcessOntology/Laboratory
- description
- "Laboratory that measured the bulge test values" [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasLaboratory
TextileCount%20
https://w3id.org/steel/ProcessOntology/TextileCount%20
Ultimate Tensile Strength
https://w3id.org/steel/ProcessOntology/UltimateTensileStrength
Damask code
https://w3id.org/steel/ProcessOntology/DamaskCode
Modulus
https://w3id.org/steel/ProcessOntology/Modulus
Repetition
https://w3id.org/steel/ProcessOntology/Repetition
LatentHardeningQ0
https://w3id.org/steel/ProcessOntology/LatentHardeningQ0
- description
- Off-diagonal elements in Interaction matrix q_ab for the same slip system family
- has super-classes
- ValueObject
- is in range of
- hasLatentHardeningQ0
ElementDeletionTreatment
https://w3id.org/steel/ProcessOntology/ElementDeletionTreatment
- description
- Determines the amount of fully damaged integration points before element deletion: >0…Number of integration points which must fail before the element is deleted <0…-NUMINT is percentage of integration points/layers which must fail before shell element fails =200...Turns off erosion for shells and solids
- has super-classes
- ValueObject
- is in range of
- hasElementDeletionTreatment
Material
https://w3id.org/steel/ProcessOntology/Material
The material used in the experiment.
- description
- "Identification of material." [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasMaterial
TotalLength
https://w3id.org/steel/ProcessOntology/TotalLength
- description
- "total length of test piece" [DIN EN ISO 6892-1, Table 1]
- has super-classes
- ValueObject
- is in range of
- hasTotalLength
EDS
https://w3id.org/steel/ProcessOntology/EDS
strip width
https://w3id.org/steel/ProcessOntology/stripWidth
TestTemperatur
https://w3id.org/steel/ProcessOntology/TestTemperatur
frame of material
https://w3id.org/steel/ProcessOntology/FrameOfMaterial
CalibrationComponents
https://w3id.org/steel/ProcessOntology/CalibrationComponents
Grade
https://w3id.org/steel/ProcessOntology/Grade
HCT980C
https://w3id.org/steel/ProcessOntology/HCT980C
EbsdFileName
https://w3id.org/steel/ProcessOntology/EbsdFileName
- description
- "Name of the EBSD-File used for the post-processing." [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEbsdFileName
NotchTensileStrength
https://w3id.org/steel/ProcessOntology/NotchTensileStrength
- description
- "notch tensile strength" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasNotchTensileStrength
HardeningParameterTheta0
https://w3id.org/steel/ProcessOntology/HardeningParameterTheta0
- description
- "Hardening parameter used in Voce-type hardening law of the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasHardeningParameterTheta0
Simulation
https://w3id.org/steel/ProcessOntology/Simulation
TotalEngineeringStrain
https://w3id.org/steel/ProcessOntology/TotalEngineeringStrain
- description
- "total engineering strain " [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasTotalEngineeringStrain
Resource
https://w3id.org/steel/ProcessOntology/CodeRessource
Remark
https://w3id.org/steel/ProcessOntology/Remark
- description
- "A specific comment about the experiment." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasRemark
SerialNumber
https://w3id.org/steel/ProcessOntology/SerialNumber
Element
https://w3id.org/steel/ProcessOntology/Element
Chemical Elements
SpecimenCrossSection
https://w3id.org/steel/ProcessOntology/SpecimenCrossSection
- description
- Cross section of a specimen, used for example in tensile tests
- has super-classes
- ValueObject
- is in range of
- hasSpecimenCrossSection
SlipSystemNumber
https://w3id.org/steel/ProcessOntology/SlipSystemNumber
- description
- "Number of slip systems used in the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasSlipSystemNumber
MeltSpinning
https://w3id.org/steel/ProcessOntology/MeltSpinning
HDF5 File Format
https://w3id.org/steel/ProcessOntology/HDF5
CRMUncertainty
https://w3id.org/steel/ProcessOntology/CRMUncertainty
Geometry
https://w3id.org/steel/ProcessOntology/Geometry
Morphological Texture
https://w3id.org/steel/ProcessOntology/MorphologicalTexture
Grain size
https://w3id.org/steel/ProcessOntology/GrainSize
EulerAngle3
https://w3id.org/steel/ProcessOntology/EulerAngle3
- description
- "One of three euler angles that are introduced by Leonhard Euler to describe the orientation of a rigid body with respect to a fixed coordinate system" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEulerAngle3
UpperYieldStrength
https://w3id.org/steel/ProcessOntology/UpperYieldStrength
- description
- "maximum value of stress prior to the first decrease in force" [DIN EN ISO 6892-1, 3.10.2.1]
- has super-classes
- ValueObject
- is in range of
- hasUpperYieldStrength
MaximumForceDiscontinousYielding
https://w3id.org/steel/ProcessOntology/MaximumForceDiscontinousYielding
- description
- "
highest force that the test piece withstands during the test after the beginning of work-hardening" [DIN EN ISO 6892-1, 3.9.2]
- has super-classes
- ValueObject
- is in range of
- hasMaximumForceDiscontinousYielding
FinalGaugeLengthAfterFracture
https://w3id.org/steel/ProcessOntology/FinalGaugeLengthAfterFracture
- description
- "length between gauge length (3.1) marks on the test piece measured after rupture, at room temperature, the two pieces having been carefully fitted back together so that their axes lie in a straight line" [DIN EN ISO 6892-1, 3.1.2]
- has super-classes
- ValueObject
- is in range of
- hasFinalGaugeLengthAfterFracture
initial thickness
https://w3id.org/steel/ProcessOntology/InitialThickness
- description
- "Initial thickness of the sheet." [DIN EN ISO 16808:2022-08, 4]
- has super-classes
- ValueObject
- is in range of
- hasInitialThickness
MaximumForce
https://w3id.org/steel/ProcessOntology/MaximumForce
- description
- "maximum force" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasMaximumForce
FrameRate
https://w3id.org/steel/ProcessOntology/FrameRate
- description
- "sampling rate of the strain measuring system (e.g. high speed video recording)" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasFrameRate
FinalCriticalStrength
https://w3id.org/steel/ProcessOntology/FinalCriticalStrength
TrueFractureStrain
https://w3id.org/steel/ProcessOntology/TrueFractureStrain
Displacement
https://w3id.org/steel/ProcessOntology/Displacement
HoleDiameter%20
https://w3id.org/steel/ProcessOntology/HoleDiameter%20
SpinPackTemperature%20
https://w3id.org/steel/ProcessOntology/SpinPackTemperature%20
Width
https://w3id.org/steel/ProcessOntology/Width
- description
- "width of the extensometer gauge length in thickness direction" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasWidth
failure
https://w3id.org/steel/ProcessOntology/Failure
UltimateElongationPercentage
https://w3id.org/steel/ProcessOntology/UltimateElongationPercentage
Hockett Sherby Parameter N
https://w3id.org/steel/ProcessOntology/HockettSherbyParameterN
Material parameter N used for the flow curve extrapolation according to Hockett and Sherby (1975).
Inv_ShearRateSensitivity
https://w3id.org/steel/ProcessOntology/Inv_ShearRateSensitivity
- description
- List of inverse strain rate sensitivity
- has super-classes
- ValueObject
- is in range of
- hasInv_ShearRateSensitivity
Empty
https://w3id.org/steel/ProcessOntology/Empty
Yield surface
https://w3id.org/steel/ProcessOntology/YieldSurface
CalibrationStatus
https://w3id.org/steel/ProcessOntology/CalibrationStatus
SpecificPlasticWork
https://w3id.org/steel/ProcessOntology/SpecificPlasticWork
- description
- "Specific plastic work data of the microstructure simulation caried out" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasSpecificPlasticWork
Test
https://w3id.org/steel/ProcessOntology/Test
like Tensile Test etc, maybe an experiment
- is in domain of
- has test property
- has testing facility
- has project number
- has project name
MicroalloyedSteel
https://w3id.org/steel/ProcessOntology/MicroalloyedSteel
Fracture Strain
https://w3id.org/steel/ProcessOntology/FractureStrain
ParallelLength
https://w3id.org/steel/ProcessOntology/ParallelLength
The length of the parallel part of the specimen
- description
- "The length of the parallel part of the specimen" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasParallelLength
number of passes
https://w3id.org/steel/ProcessOntology/numberOfPasses
TransitionRadius
https://w3id.org/steel/ProcessOntology/TransitionRadius
- description
- "transition radius between parallel part and clamping part of the test piece" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTransitionRadius
grain boundaries
https://w3id.org/steel/ProcessOntology/GrainBoundaries
need at least two grains
InteractionMatrix
https://w3id.org/steel/ProcessOntology/InteractionMatrix
- description
- "Interaction matrix used in the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasInteractionMatrix
MaximumSpeed
https://w3id.org/steel/ProcessOntology/MaximumSpeed
Hockett Sherby Yield Stress
https://w3id.org/steel/ProcessOntology/HockettSherbyYieldStress
Yield stress used for the flow curve extrapolation according to Hockett and Sherby (1975).
NumberSlipSystems
https://w3id.org/steel/ProcessOntology/NumberSlipSystems
- description
- List of number of slip systems per slip system family
- has super-classes
- ValueObject
- is in range of
- hasNumberSlipSystems
PercentagePlasticExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/PercentagePlasticExtensionAtMaximumForce
- description
- "percentage plastic extension at maximum force, Fm" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasPercentagePlasticExtensionAtMaximumForce
NumberGrains
https://w3id.org/steel/ProcessOntology/NumberGrains
- description
- "Number of grains represented by the euler angles." [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasNumberGrains
Color
https://w3id.org/steel/ProcessOntology/Color
A Color, Green, Yellow, etc..
Mega Pascal per Second
https://w3id.org/steel/ProcessOntology/MegaPA-PER-SEC
Stress rate, e.g. referenced by tensile tests
TimeStamp
https://w3id.org/steel/ProcessOntology/TimeStamp
Date when the experiment was conducted.
- description
- Date and time when the experiment was conducted.
- has super-classes
- ValueObject
- is in range of
- hasTimeStamp
CrystalPlasticityConstitutiveModel
https://w3id.org/steel/ProcessOntology/CrystalPlasticityConstitutiveModel
- description
- "Description of the crystal plasticity constitutive model used for the microstructure simulations" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasCrystalPlasticityConstitutiveModel
BatchNumber
https://w3id.org/steel/ProcessOntology/BatchNumber
DamageExponent
https://w3id.org/steel/ProcessOntology/DamageExponent
- description
- Exponent for nonlinear damage accumulation
- has super-classes
- ValueObject
- is in range of
- hasDamageExponent
Operator
https://w3id.org/steel/ProcessOntology/Operator
some kind of a step. mathematical Operator
- description
- "Person performed the hydraulic bulge test." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasOperator
MassDensity
https://w3id.org/steel/ProcessOntology/MassDensity
Fluid solid transition
https://w3id.org/steel/ProcessOntology/FluidSolidTransition
LowerYieldStrength
https://w3id.org/steel/ProcessOntology/LowerYieldStrength
Represents the Lower Yield Strength of a material, which is the stress point at which the material transitions from elastic deformation to plastic deformation, without an increase in applied load. It is a crucial parameter in materials science, used for designing and analyzing the structural integrity and durability of materials under operational loads. The values are typically measured in Pascals (Pa).
- description
- "lowest value of stress during plastic yielding, ignoring any initial transient effects" [DIN EN ISO 6892-1, 3.10.2.2]
- has super-classes
- ValueObject
- is in range of
- hasLowerYieldStrength
PercentageExtension
https://w3id.org/steel/ProcessOntology/PercentageExtension
- description
- "engineering strain" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasPercentageExtension
FEMSolver
https://w3id.org/steel/ProcessOntology/FEMSolver
- description
- "FEM Solver used for carring out the microstructure simulations" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasFEMSolver
MeanEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/MeanEngineeringStrainRate
- description
- "mean engineering strain rate = A/tf" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasMeanEngineeringStrainRate
PercentagePermanentElongation
https://w3id.org/steel/ProcessOntology/PercentagePermanentElongation
- description
- "increase in the original gauge length (3.1.1) of a test piece after removal of a specified stress, expressed as a percentage of the original gauge length" [DIN EN ISO 6892-1, 3.4.1]
- has super-classes
- ValueObject
- is in range of
- hasPercentagePermanentElongation
ConstitutiveModel
https://w3id.org/steel/ProcessOntology/ConstitutiveModel
TotalAverageDiameter
https://w3id.org/steel/ProcessOntology/TotalAverageDiameter
- description
- Total Average Diameter
- has super-classes
- ValueObject
- is in range of
- hasTotalAverageDiameter
ComputerControlledTensileTestingMachine
https://w3id.org/steel/ProcessOntology/ComputerControlledTensileTestingMachine
- description
- "machine for which the control and monitoring of the test, the measurements, and the data processing are undertaken by computer" [DIN EN ISO 6892-1, 3.12]
- has super-classes
- ValueObject
- is in range of
- hasComputerControlledTensileTestingMachine
QuenchFlow%20
https://w3id.org/steel/ProcessOntology/QuenchFlow%20
ProofStrength_0.2Percentage
https://w3id.org/steel/ProcessOntology/ProofStrength_0.2Percentage
- description
- "yield strength, 0.2 %" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasProofStrength_0.2Percentage
StressRate
https://w3id.org/steel/ProcessOntology/StressRate
- description
- "increase of stress per time" [DIN EN ISO 6892-1, 3.7.4]
- has super-classes
- ValueObject
- is in range of
- hasStressRate
DamageThreshold
https://w3id.org/steel/ProcessOntology/DamageThreshold
- description
- Damage threshold value (critical damage). If a load curve of critical plastic strain or fixed value is given by ECRIT, input is ignored.
- has super-classes
- ValueObject
- is in range of
- hasDamageThreshold
MaximumForceNoDiscontinousYielding
https://w3id.org/steel/ProcessOntology/MaximumForceNoDiscontinousYielding
- description
- "
highest force that the test piece withstands during the test" [DIN EN ISO 6892-1, 3.9.1]
- has super-classes
- ValueObject
- is in range of
- hasMaximumForceNoDiscontinousYielding
ElementDeletionFlag
https://w3id.org/steel/ProcessOntology/ElementDeletionFlag
- description
- Erosion flag (only for solid elements): =0.0: default, element erosion is allowed =1.0: element does not erode; deviatoric stresses set to 0 when element fails
- has super-classes
- ValueObject
- is in range of
- hasElementDeletionFlag
Hill48F
https://w3id.org/steel/ProcessOntology/Hill48F
Parameter F for Hill48 yield criterion
Deformation
https://w3id.org/steel/ProcessOntology/Deformation
GodetTemperature%20
https://w3id.org/steel/ProcessOntology/GodetTemperature%20
Elasticity
https://w3id.org/steel/ProcessOntology/Elasticity
PoissonRatio
https://w3id.org/steel/ProcessOntology/PoissonRatio
- description
- Poission Ratio to determine the linear elasticity
- has super-classes
- ValueObject
- is in range of
- hasPoissonRatio
OriginalDiameter
https://w3id.org/steel/ProcessOntology/OriginalDiameter
- description
- "original diameter of the parallel length of a circular test piece, or diameter of round wire or internal diameter of a tube" [DIN EN ISO 6892-1, Table 1]
- has super-classes
- ValueObject
- is in range of
- hasOriginalDiameter
MeasuringRange
https://w3id.org/steel/ProcessOntology/MeasuringRange
AbsoluteCrossheadTravel
https://w3id.org/steel/ProcessOntology/AbsoluteCrossheadTravel
- description
- "Absolute position of the crosshead." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasAbsoluteCrossheadTravel
PermanentSetStrength
https://w3id.org/steel/ProcessOntology/PermanentSetStrength
- description
- "stress at which, after removal of force, a specified permanent elongation or extension, expressed respectively as a percentage of original gauge length, or extensometer gauge length, has not been exceeded" [DIN EN ISO 6892-1, 3.10.5]
- has super-classes
- ValueObject
- is in range of
- hasPermanentSetStrength
WidthChange
https://w3id.org/steel/ProcessOntology/WidthChange
- description
- "Change of the sample width." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasWidthChange
TensionAtWinder%20
https://w3id.org/steel/ProcessOntology/TensionAtWinder%20
WidthAfterFracture2
https://w3id.org/steel/ProcessOntology/WidthAfterFracture2
ForceMeasuringSystem
https://w3id.org/steel/ProcessOntology/ForceMeasuringSystem
- description
- Measuring system for measurement of force
- has super-classes
- ValueObject
- is in range of
- hasForceMeasuringSystem
ThicknessAfterFracture1
https://w3id.org/steel/ProcessOntology/ThicknessAfterFracture1
rolling schedule
https://w3id.org/steel/ProcessOntology/rollingSchedule
CameraSystem
https://w3id.org/steel/ProcessOntology/CameraSystem
- description
- "Type of camera system used for the hydraulic bulge test." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasCameraSystem
DataSamplingFrequency
https://w3id.org/steel/ProcessOntology/DataSamplingFrequency
Damage
https://w3id.org/steel/ProcessOntology/Damage
Annealing
https://w3id.org/steel/ProcessOntology/Annealing
YieldingIdentifier
https://w3id.org/steel/ProcessOntology/YieldingIdentifier
- description
- Identifier which relates the Load Curve to descibe the yield stress as a function of effective plastic strain. Identifier which relates the Table to descibe the yield stress by using different Load Curves as a function of effective plastic strain and the strain rate (each load curve is related to an individual stain rate)
- has super-classes
- ValueObject
- is in range of
- hasYieldingIdentifier
TestTemperature
https://w3id.org/steel/ProcessOntology/TestTemperature
- description
- "The temperature during the experiment." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTestTemperature
Nakajima Test
https://w3id.org/steel/ProcessOntology/NakajimaTest
FailureCriteriaTypeAdd4ElementDeletion
https://w3id.org/steel/ProcessOntology/FailureCriteriaTypeAdd4ElementDeletion
- description
- Number of time steps that the additional failure criterion must be met before element deletion
- has super-classes
- ValueObject
- is in range of
- hasFailureCriteriaTypeAdd4ElementDeletion
normal direction
https://w3id.org/steel/ProcessOntology/normalDirection
True Stress
https://w3id.org/steel/ProcessOntology/TrueStress
- description
- "true stress" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasTrueStress
ExperimentIdentifier
https://w3id.org/steel/ProcessOntology/ExperimentIdentifier
MeasuringAid
https://w3id.org/steel/ProcessOntology/MeasuringAid
TestPieceProducer
https://w3id.org/steel/ProcessOntology/TestPieceProducer
PercentageTotalExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/PercentageTotalExtensionAtMaximumForce
- description
- "Percentage total extension at maximum force Fm (total strain at maximum force, Fm)" [DIN EN ISO 6892-1, 3.6.4]
- has super-classes
- ValueObject
- is in range of
- hasPercentageTotalExtensionAtMaximumForce
Strain
https://w3id.org/steel/ProcessOntology/Strain
- description
- "extension expressed as a percentage of the extensometer gauge length" [DIN EN ISO 6892-1, 3.6.1]
- has super-classes
- ValueObject
- is in range of
- hasStrain
WidthStrain
https://w3id.org/steel/ProcessOntology/WidthStrain
- description
- "engineering strain in width direction" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasWidthStrain
Demonstrator
https://w3id.org/steel/ProcessOntology/Demonstrator
CrossHardeningParameter
https://w3id.org/steel/ProcessOntology/CrossHardeningParameter
ElasticConstantC11
https://w3id.org/steel/ProcessOntology/ElasticConstantC11
- description
- "Elastic constant to describe the anisotropic elastic material behaviour" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasElasticConstantC11
Hockett Sherby Parameter p
https://w3id.org/steel/ProcessOntology/HockettSherbyParameterP
Material parameter p used for the flow curve extrapolation according to Hockett and Sherby (1975).
Pyiron notebook
https://w3id.org/steel/ProcessOntology/PyironNotebook
Jupyter Pyiron Notebook
MatPiecewiseLinearPlasticityLogInterpolation
https://w3id.org/steel/ProcessOntology/MatPiecewiseLinearPlasticityLogInterpolation
- description
- Simple incompressible plasticity model with logarithmic interpolation
- has super-classes
- ValueObject
- is in range of
- hasMatPiecewiseLinearPlasticityLogInterpolation
Pyiron job metadata
https://w3id.org/steel/ProcessOntology/JobMetadata
each pyiron job has some metadata which is stored in the central sql database
Chemical Composition
https://w3id.org/steel/ProcessOntology/ChemicalComposition
ForceMeasuringDevice
https://w3id.org/steel/ProcessOntology/ForceMeasuringDevice
Type of the force measurement (force transducer, strain gauges, ....)
- description
- "Type of the force transducer" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasForceMeasuringDevice
HardeningLaw
https://w3id.org/steel/ProcessOntology/HardeningLaw
- description
- "Hardening law on slip plane used for the crystal plasticity model of the microstructure model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasHardeningLaw
NominalEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/NominalEngineeringStrainRate
- description
- "nominal engineering strain rate = vo/Lc" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasNominalEngineeringStrainRate
SpecificHeatCapacity
https://w3id.org/steel/ProcessOntology/SpecificHeatCapacity
- description
- Specific heat capacity
- has super-classes
- ValueObject
- is in range of
- hasSpecificHeatCapacity
PressureAtExtruder%20
https://w3id.org/steel/ProcessOntology/PressureAtExtruder%20
Testing machine
https://w3id.org/steel/ProcessOntology/TestingMachine
A machine pervorming an experimental test
Casting
https://w3id.org/steel/ProcessOntology/Casting
PumpSpeed%20
https://w3id.org/steel/ProcessOntology/PumpSpeed%20
Wahre elastische Dehnung
https://w3id.org/steel/ProcessOntology/TrueElasticStrain
flat rolling
https://w3id.org/steel/ProcessOntology/FlatRolling
OriginalGaugeLength
https://w3id.org/steel/ProcessOntology/OriginalGaugeLength
The intial gauge length given by the specimen geometry
- description
- "length between gauge length (3.1) marks on the test piece measured at room temperature before the testlength between gauge length (3.1) marks on the test piece measured at room temperature before the test" [DIN EN ISO 6892-1, 3.1.1]
- has super-classes
- ValueObject
- is in range of
- hasOriginalGaugeLength
TestPieceThickness
https://w3id.org/steel/ProcessOntology/TestPieceThickness
PostProcessingSoftware
https://w3id.org/steel/ProcessOntology/PostProcessingSoftware
- description
- "Software used for post-processing." [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasPostProcessingSoftware
Hill48M
https://w3id.org/steel/ProcessOntology/Hill48M
Parameter M for Hill48 yield criterion
TargetClampingForce
https://w3id.org/steel/ProcessOntology/TargetClampingForce
Belastungszeit
https://w3id.org/steel/ProcessOntology/LoadingTime
Tensile test meta data entry from BAM file
strip tension
https://w3id.org/steel/ProcessOntology/stripTension
ElasticityModel
https://w3id.org/steel/ProcessOntology/ElasticityModel
- description
- connects elastic strain with stress vi stiffness matrix
- has super-classes
- ValueObject
- is in range of
- hasElasticityModel
final thickness
https://w3id.org/steel/ProcessOntology/FinalThickness
Feedback Loop
https://w3id.org/steel/ProcessOntology/FeedbackLoop
StandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/StandardDeviationOfTheSlope
- description
- "additional result of the linear regression which describes the difference of the stress values from the best fit line for the given extension values in the evaluation range" [DIN EN ISO 6892-1, 3.16]
- has super-classes
- ValueObject
- is in range of
- hasStandardDeviationOfTheSlope
Tester
https://w3id.org/steel/ProcessOntology/Tester
The name or ID of the person who conducted the experiment.
- description
- "The name or ID of the person who conducted the experiment." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTester
Steel
https://w3id.org/steel/ProcessOntology/Steel
ProofStrength_1Percentage
https://w3id.org/steel/ProcessOntology/ProofStrength_1Percentage
- description
- "yield strength, 1 %" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasProofStrength_1Percentage
NumberFailedIntegrationPoints
https://w3id.org/steel/ProcessOntology/NumberFailedIntegrationPoints
- description
- Number or percentage of failed integration points prior to element deletion. GT.0.0: Number of integration points which must fail before element is deleted. LT.0.0: Applies only to shells. |NUMFIP| is the percentage of layers which must fail before an element is deleted. For shell formulations with 4 integration points per layer, the layer is considered failed if any of the integration points in the layer fails.
- has super-classes
- ValueObject
- is in range of
- hasNumberFailedIntegrationPoints
Radius
https://w3id.org/steel/ProcessOntology/Radius
- description
- "Radius of the notch (only for notched shear tensile specimens)" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasRadius
CrystalPlasticityParameterFile
https://w3id.org/steel/ProcessOntology/CrystalPlasticityParameterFile
- description
- "File containing parameters of the crystal plasticity constitutive model used" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasCrystalPlasticityParameterFile
Composition
https://w3id.org/steel/ProcessOntology/Composition
Combination of Elements in a Phase or a whole Sample. Related to Alloys
- has super-classes
- ValueObject
- is in range of
- hasComposition
BiaxialStress
https://w3id.org/steel/ProcessOntology/BiaxialStress
- description
- "Biaxial stress received from post-processing the hydraulic bulge test." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasBiaxialStress
Experiment
https://w3id.org/steel/ProcessOntology/Experiment
IndenterIdentifier
https://w3id.org/steel/ProcessOntology/IndenterIdentifier
Filter
https://w3id.org/steel/ProcessOntology/Filter
MajorTrueStrain
https://w3id.org/steel/ProcessOntology/MajorTrueStrain
- description
- "major true strain" [DIN EN ISO 12004-2: 2021_07, 8]
- has super-classes
- ValueObject
- is in range of
- hasMajorTrueStrain
ComplexPhaseSteel
https://w3id.org/steel/ProcessOntology/ComplexPhaseSteel
GodetSpeedWinder%20
https://w3id.org/steel/ProcessOntology/GodetSpeedWinder%20
PistonSpeed
https://w3id.org/steel/ProcessOntology/PistonSpeed
- description
- "Speed of the piston used in the hydraulic bulge test." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasPistonSpeed
Work
https://w3id.org/steel/ProcessOntology/Work
TensileStrength
https://w3id.org/steel/ProcessOntology/TensileStrength
- description
- "tensile strength" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTensileStrength
MinTimeStep4ElementDel
https://w3id.org/steel/ProcessOntology/MinTimeStep4ElementDel
- description
- Minimum time step size for automatic element deletion
- has super-classes
- ValueObject
- is in range of
- hasMinTimeStep4ElementDel
AmplitudeFile
https://w3id.org/steel/ProcessOntology/AmplitudeFile
- description
- "File containing information regarding the amplitude used for micorstructure simulation" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasAmplitudeFile
DamageTreatment
https://w3id.org/steel/ProcessOntology/DamageTreatment
- description
- interpreted digit-wise as follows: DTYP = [????] = ??+10×?? M.EQ.0: Damage is accumulated, but there is no coupling to flow stress and no failure. M.EQ.1: Damage is accumulated, and element failure occurs for ?? = 1. Coupling of damage to flow stress depending on parameters. N.EQ.0: Equivalent plastic strain is the driving quantity for the damage. N.GT.0: The Nth additional history variable is the driving quantity for damage.
- has super-classes
- ValueObject
- is in range of
- hasDamageTreatment
RadiusDie
https://w3id.org/steel/ProcessOntology/RadiusDie
- description
- "Radius of the die (inner) of the testing machine. " [DIN EN ISO 16808:2022-08, 4]
- has super-classes
- ValueObject
- is in range of
- hasRadiusDie
StrainRateScaleIdendifier
https://w3id.org/steel/ProcessOntology/StrainRateScaleIdendifier
- description
- Load curve Identifier defining strain rate scaling effect on yield stress.
- has super-classes
- ValueObject
- is in range of
- hasStrainRateScaleIdendifier
Crystollography Texture
https://w3id.org/steel/ProcessOntology/CrystallographyTexture
Coordinate system
https://w3id.org/steel/ProcessOntology/CoordinateSystem
Hill48H
https://w3id.org/steel/ProcessOntology/Hill48H
Parameter H for Hill48 yield criterion
ShearLength
https://w3id.org/steel/ProcessOntology/ShearLength
- description
- "length of the shear zone" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasShearLength
MAT_ADD_DAMAGE_GISSMO
https://w3id.org/steel/ProcessOntology/MAT_ADD_DAMAGE_GISSMO
Shear Test
https://w3id.org/steel/ProcessOntology/ShearTest
SpecificPlasticWorkValue
https://w3id.org/steel/ProcessOntology/SpecificPlasticWorkValue
- description
- "Specific plastic work used for idenfication of a point on the yield surface" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasSpecificPlasticWorkValue
Anfangsdehnung
https://w3id.org/steel/ProcessOntology/InitialStrain
Tensile test meta data entry from BAM file
Workflow step
https://w3id.org/steel/ProcessOntology/WorkflowStep
Time
https://w3id.org/steel/ProcessOntology/Time
- description
- "Recorded time during the hydraulic bulge test." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTime
DiameterAfterFracture2
https://w3id.org/steel/ProcessOntology/DiameterAfterFracture2
TestPieceIdentifier
https://w3id.org/steel/ProcessOntology/TestPieceIdentifier
Validation
https://w3id.org/steel/ProcessOntology/Validation
Experimental test
https://w3id.org/steel/ProcessOntology/ExperimentalTest
CoefficientOfCorrelation
https://w3id.org/steel/ProcessOntology/CoefficientOfCorrelation
- description
- "additional result of the linear regression which describes the quality of the stress-strain curve in the evaluation range" [DIN EN ISO 6892-1, 3.15]
- has super-classes
- ValueObject
- is in range of
- hasCoefficientOfCorrelation
YarnTenacity%20
https://w3id.org/steel/ProcessOntology/YarnTenacity%20
Phase Boundary
https://w3id.org/steel/ProcessOntology/PhaseBoundary
TestPiece
https://w3id.org/steel/ProcessOntology/TestPiece
StrainRate
https://w3id.org/steel/ProcessOntology/StrainRate
the rate at which a material deforms under applied stress. It is a measure of how quickly the material's shape or dimensions change in response to external forces, such as tension, compression, or shear. Strain rate is typically expressed in units of inverse time (e.g., s^-1 or min^-1).
- description
- "increase of strain, measured with an extensometer, in extensometer gauge length" [DIN EN ISO 6892-1, 3.7.1]
- has super-classes
- ValueObject
- is in range of
- hasStrainRate
PunchVelocity
https://w3id.org/steel/ProcessOntology/PunchVelocity
- description
- "punch velocity" [DIN EN ISO 12004-2: 2021_07, 13]
- has super-classes
- ValueObject
- is in range of
- hasPunchVelocity
ExtensionAtFracture
https://w3id.org/steel/ProcessOntology/ExtensionAtFracture
- description
- "Displacement of the extensometer (!) length at fracture" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasExtensionAtFracture
FlowStressExponent_a
https://w3id.org/steel/ProcessOntology/FlowStressExponent_a
DAMASK phenopower law parameter
BrinellHardnessAverage
https://w3id.org/steel/ProcessOntology/BrinellHardnessAverage
- description
- Average Brinell Hardness
- has super-classes
- ValueObject
- is in range of
- hasBrinellHardnessAverage
HCT980X
https://w3id.org/steel/ProcessOntology/HCT980X
ProjectName
https://w3id.org/steel/ProcessOntology/ProjectName
Name of the Project.
- description
- "Instabilität" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasProjectName
- has project name
Temperature
https://w3id.org/steel/ProcessOntology/Temperature
RadiusCurvature
https://w3id.org/steel/ProcessOntology/RadiusCurvature
- description
- "Radius of the curvature in the dome." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasRadiusCurvature
Diameter
https://w3id.org/steel/ProcessOntology/Diameter
The initial diameter of the parallel length
- description
- The initial diameter of the parallel length
- has super-classes
- ValueObject
- is in range of
- hasDiameter
Percipation
https://w3id.org/steel/ProcessOntology/Precipitation
Microstructure
https://w3id.org/steel/ProcessOntology/Microstructure
MaterialsScience
https://w3id.org/steel/ProcessOntology/MaterialsScience
GodetSpeed%20
https://w3id.org/steel/ProcessOntology/GodetSpeed%20
TrueStressAtFracture
https://w3id.org/steel/ProcessOntology/TrueStressAtFracture
- description
- "true stress at fracture" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTrueStressAtFracture
Pyiron job output
https://w3id.org/steel/ProcessOntology/JobOutput
the output parameter for a pyiron job
ExtruderTemperature%20
https://w3id.org/steel/ProcessOntology/ExtruderTemperature%20
TaylorQuinneyCoefficient
https://w3id.org/steel/ProcessOntology/TaylorQuinneyCoefficient
- description
- Determines the fraction of plastic work converted into heat: <0…|BETA|->load curve for temperature dependend BETA >0…constant value is used
- has super-classes
- ValueObject
- is in range of
- hasTaylorQuinneyCoefficient
BrinellHardnessStandardDeviation
https://w3id.org/steel/ProcessOntology/BrinellHardnessStandardDeviation
- description
- Standard Deviation Brinell Hardness
- has super-classes
- ValueObject
- is in range of
- hasBrinellHardnessStandardDeviation
work roll diameter
https://w3id.org/steel/ProcessOntology/workRollDiameter
MaterialClass
https://w3id.org/steel/ProcessOntology/MaterialClass
PercentageYieldPointExtension
https://w3id.org/steel/ProcessOntology/PercentageYieldPointExtension
- description
- "in discontinuous yielding materials, the extension between the start of yielding and the start of uniform work-hardening, expressed as a percentage of the extensometer gauge length" [DIN EN ISO 6892-1, 3.6.3]
- has super-classes
- ValueObject
- is in range of
- hasPercentageYieldPointExtension
strip
https://w3id.org/steel/ProcessOntology/Strip
EffecticStrain
https://w3id.org/steel/ProcessOntology/EffecticStrain
- description
- "Effective strain data of the microstructure simulation caried out" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEffecticStrain
FailureTreatment
https://w3id.org/steel/ProcessOntology/FailureTreatment
- description
- Descibes the treatment of failure: <0…User defined failure subroutine, matusr_24 in dyn21.F =0…no failure is taken into account >0…constant failure strain
- has super-classes
- ValueObject
- is in range of
- hasFailureTreatment
Simulation Code
https://w3id.org/steel/ProcessOntology/SimulationCode
draught
https://w3id.org/steel/ProcessOntology/draught
TestPieceComposition
https://w3id.org/steel/ProcessOntology/TestPieceComposition
- description
- Test Piece Composition
- has super-classes
- ValueObject
- is in range of
- hasTestPieceComposition
ShearLengthAfterFracture2
https://w3id.org/steel/ProcessOntology/ShearLengthAfterFracture2
ductility
https://w3id.org/steel/ProcessOntology/Ductility
HardeningParameterTau1
https://w3id.org/steel/ProcessOntology/HardeningParameterTau1
- description
- "Hardening parameter used in Voce-type hardening law of the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasHardeningParameterTau1
File
https://w3id.org/steel/ProcessOntology/CodeFileRessource
ModulusOfElasticity
https://w3id.org/steel/ProcessOntology/ModulusOfElasticity
- description
- "quotient of change of stress ΔR and change of percentage extension Δe in the range of evaluation, multiplied by 100 %" [DIN EN ISO 6892-1, 3.13]
- has super-classes
- ValueObject
- is in range of
- hasModulusOfElasticity
ExtensionMeasuringSystem
https://w3id.org/steel/ProcessOntology/ExtensionMeasuringSystem
- description
- "Measuring system for measurement of extension in the area of the gauge length" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasExtensionMeasuringSystem
EulerAngle2
https://w3id.org/steel/ProcessOntology/EulerAngle2
- description
- "One of three euler angles that are introduced by Leonhard Euler to describe the orientation of a rigid body with respect to a fixed coordinate system" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEulerAngle2
PercentageElongation
https://w3id.org/steel/ProcessOntology/PercentageElongation
- description
- "elongation expressed as a percentage of the original gauge length" [DIN EN ISO 6892-1, 3.4]
- has super-classes
- ValueObject
- is in range of
- hasPercentageElongation
HardeningCurve
https://w3id.org/steel/ProcessOntology/HardeningCurve
- description
- "Tabular stress and strain data of the hardening law on the slip plane" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasHardeningCurve
PreliminaryForce
https://w3id.org/steel/ProcessOntology/PreliminaryForce
- description
- "In order to ensure the alignment of the test piece and grip arrangement, a preliminary force may be applied provided it does not exceed a value corresponding to 5 % of the specified or expected yield strength" [DIN EN ISO 6892-1, 10.2]
- has super-classes
- ValueObject
- is in range of
- hasPreliminaryForce
ductile failure
https://w3id.org/steel/ProcessOntology/DuctileFailure
SampleCode
https://w3id.org/steel/ProcessOntology/SampleCode
- description
- "QR-Code from Label System" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasSampleCode
Reference Job
https://w3id.org/steel/ProcessOntology/ReferenceJob
DualPhaseSteel
https://w3id.org/steel/ProcessOntology/DualPhaseSteel
Abaqus
https://w3id.org/steel/ProcessOntology/Abaqus
TrueFractureStress
https://w3id.org/steel/ProcessOntology/TrueFractureStress
BoundaryFile
https://w3id.org/steel/ProcessOntology/BoundaryFile
- description
- "File containing information regarding the boundaries used for micorstructure simulation" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasBoundaryFile
GridSize
https://w3id.org/steel/ProcessOntology/GridSize
Unusual result
https://w3id.org/steel/ProcessOntology/UnusualResult
Exeriment result that differs from a given simulation result, or the other way round.
DX56D
https://w3id.org/steel/ProcessOntology/DX56D
StrainRateScaleParameterP
https://w3id.org/steel/ProcessOntology/StrainRateScaleParameterP
- description
- Parameter P for strain rate approach for using the Cowper and Symonds model which scales the yield stress with the factor: 1+(epsDot/C)^(1/P)
- has super-classes
- ValueObject
- is in range of
- hasStrainRateScaleParameterP
AnisotropicYieldFunction
https://w3id.org/steel/ProcessOntology/AnisotropicYieldFunction
- description
- "Anisotropic yield model used for the parameter identification" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasAnisotropicYieldFunction
Standard
https://w3id.org/steel/ProcessOntology/Standard
bulge test
https://w3id.org/steel/ProcessOntology/BulgeTest
TrueTotalStrain
https://w3id.org/steel/ProcessOntology/TrueTotalStrain
- description
- "true total strain " [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasTrueTotalStrain
ProjectNumber
https://w3id.org/steel/ProcessOntology/ProjectNumber
Project identification number.
- description
- "Project identification number." [Authors]
- has super-classes
- ValueObject
- is in range of
- has project number
- hasProjectNumber
MaterialsModeling
https://w3id.org/steel/ProcessOntology/MaterialsModeling
Coating
https://w3id.org/steel/ProcessOntology/Coating
Thing that you put on the surface of a specimen that influences the surface behaviour
TangentYieldModulus
https://w3id.org/steel/ProcessOntology/TangentYieldModulus
- description
- Slope of linear hardening, if noidentifier for hardening curve (LCSS>0) is prescibed
- has super-classes
- ValueObject
- is in range of
- hasTangentYieldModulus
Benchmark
https://w3id.org/steel/ProcessOntology/Benchmark
Fracture Stress
https://w3id.org/steel/ProcessOntology/FractureStress
PercentagePermanentExtension
https://w3id.org/steel/ProcessOntology/PercentagePermanentExtension
- description
- "plastic engineering strain" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasPercentagePermanentExtension
OriginalCrossSection
https://w3id.org/steel/ProcessOntology/OriginalCrossSection
- description
- "original cross-sectional area of the parallel length" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasOriginalCrossSection
LSDyna
https://w3id.org/steel/ProcessOntology/Lsdyna
YoungsModulus
https://w3id.org/steel/ProcessOntology/YoungsModulus
Modulus of elasticity
- description
- Linear Elastic Modulus to determine the linear elasticity
- has super-classes
- ValueObject
- is in range of
- hasYoungsModulus
OriginalCrosssection
https://w3id.org/steel/ProcessOntology/OriginalCrosssection
- description
- "original crosssection area of the parallel length" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasOriginalCrosssection
FailureCriteriaTypeAdd4StrainAverage
https://w3id.org/steel/ProcessOntology/FailureCriteriaTypeAdd4StrainAverage
- description
- Number of time steps for running average of plastic failure strain in the additional failure criterion
- has super-classes
- ValueObject
- is in range of
- hasFailureCriteriaTypeAdd4StrainAverage
OriginalThickness
https://w3id.org/steel/ProcessOntology/OriginalThickness
Original width of the parallel length of a flat test piece
- description
- "Original width of the parallel length of a flat test piece" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasOriginalThickness
Identifier
https://w3id.org/steel/ProcessOntology/Identifier
SlopeElasticPartStressStrainCurve
https://w3id.org/steel/ProcessOntology/SlopeElasticPartStressStrainCurve
- description
- "Slope of the elastic pasrt of the stress-strain curve: in the elastic pasrt of the stress-strain curve the value of the slope can closely agree with the value of the modulus of elasticity if optimal conditions are used (high resolution, double-sided averaging extensometers, proper alignment of the test piece, etc.)" [ISO 26203-2, 2011, 5]
- has super-classes
- ValueObject
- is in range of
- hasSlopeElasticPartStressStrainCurve
InitialSheetThickness
https://w3id.org/steel/ProcessOntology/InitialSheetThickness
ResultsFile
https://w3id.org/steel/ProcessOntology/ResultsFile
- description
- "File containing the results of a single virtual experiment" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasResultsFile
PunchDiameter
https://w3id.org/steel/ProcessOntology/PunchDiameter
PercentageTotalExtensionAtFracture
https://w3id.org/steel/ProcessOntology/PercentageTotalExtensionAtFracture
- description
- "total extension (elastic extension plus plastic extension) at the moment of fracture, expressed as a percentage of the extensometer gauge length" [DIN EN ISO 6892-1, 3.6.6]
- has super-classes
- ValueObject
- is in range of
- hasPercentageTotalExtensionAtFracture
Pyiron job input
https://w3id.org/steel/ProcessOntology/JobInput
Furnace
https://w3id.org/steel/ProcessOntology/Furnace
SampleIdentifier-2
https://w3id.org/steel/ProcessOntology/SampleIdentifier-2
- description
- "Unique ID (IWM intern)" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasSampleIdentifier-2
Crash Test
https://w3id.org/steel/ProcessOntology/CrashTest
EngineeringStrain
https://w3id.org/steel/ProcessOntology/EngineeringStrain
- description
- "time dependent engineering strain " [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasEngineeringStrain
DisplacementTransducer
https://w3id.org/steel/ProcessOntology/DisplacementTransducer
Type of the displacement transducer.
- description
- "Type of the displacement transducer." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasDisplacementTransducer
SandSize%20
https://w3id.org/steel/ProcessOntology/SandSize%20
FormingLimitCurve
https://w3id.org/steel/ProcessOntology/FormingLimitCurve
TestPieceGeometry
https://w3id.org/steel/ProcessOntology/TestPieceGeometry
The type of the specimen.
- description
- "The type of the specimen." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTestPieceGeometry
Supplier
https://w3id.org/steel/ProcessOntology/Supplier
Experimental workflow
https://w3id.org/steel/ProcessOntology/ExperimentalWorkflow
ForceAtFracture
https://w3id.org/steel/ProcessOntology/ForceAtFracture
HomogenizationModel
https://w3id.org/steel/ProcessOntology/HomogenizationModel
- description
- just pass information between upper and lower scale
- has super-classes
- ValueObject
- is in range of
- hasHomogenizationModel
TestingFacility
https://w3id.org/steel/ProcessOntology/TestingFacility
Facility that conducted the experiment.
- description
- "Facility that conducted the experiment." [Authors]
- has super-classes
- ValueObject
- is in range of
- has testing facility
- hasTestingFacility
ReferenceElementSize
https://w3id.org/steel/ProcessOntology/ReferenceElementSize
- description
- Reference element size for which an additional output of damage (and potentially plastic strain) will be generated. This is necessary to ensure the applicability of resulting damage quantities when transferred to different mesh sizes.
- has super-classes
- ValueObject
- is in range of
- hasReferenceElementSize
TestingDirection
https://w3id.org/steel/ProcessOntology/TestingDirection
- description
- "testing direction related to the rolling direction" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTestingDirection
InitialDisplacementRate
https://w3id.org/steel/ProcessOntology/InitialDisplacementRate
- description
- "The velocity of the actuator" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasInitialDisplacementRate
Phase
https://w3id.org/steel/ProcessOntology/Phase
Region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform (Wikipedia)
Total Elongation
https://w3id.org/steel/ProcessOntology/TotalElongation
LatentHardeningQ1
https://w3id.org/steel/ProcessOntology/LatentHardeningQ1
- description
- Off-diagonal elements in Interaction matrix q_ab for different slip system family
- has super-classes
- ValueObject
- is in range of
- hasLatentHardeningQ1
DrawingSpeed
https://w3id.org/steel/ProcessOntology/DrawingSpeed
EstimatedStrainRateOverTheParallelLength
https://w3id.org/steel/ProcessOntology/EstimatedStrainRateOverTheParallelLength
- description
- "estimated strain rate over the parallel length" [DIN EN ISO 6892-1, 3.7.2]
- has super-classes
- ValueObject
- is in range of
- hasEstimatedStrainRateOverTheParallelLength
ConstitutiveModelParameter
https://w3id.org/steel/ProcessOntology/ConstitutiveModelParameter
Property of structural relevance
https://w3id.org/steel/ProcessOntology/PropertyOfStructuralRelevance
Properties that contribute towards the structural integrity of a component. Example Thickness, negative example Paint/ Color of Paint
SpecimenWidth
https://w3id.org/steel/ProcessOntology/SpecimenWidth
Frame of reference
https://w3id.org/steel/ProcessOntology/FrameOfReference
Force
https://w3id.org/steel/ProcessOntology/Force
- description
- "The force measured with the force measuring system" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasForce
WidthAfterFracture1
https://w3id.org/steel/ProcessOntology/WidthAfterFracture1
Sheet thickness
https://w3id.org/steel/ProcessOntology/SheetThickness
IndentationDiameterHorizontal
https://w3id.org/steel/ProcessOntology/IndentationDiameterHorizontal
- description
- Indentation Horizontal Diameter
- has super-classes
- ValueObject
- is in range of
- hasIndentationDiameterHorizontal
HardeningParameterTheta1
https://w3id.org/steel/ProcessOntology/HardeningParameterTheta1
- description
- "Hardening parameter used in Voce-type hardening law of the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasHardeningParameterTheta1
MachineProtocol
https://w3id.org/steel/ProcessOntology/MachineProtocol
TruePlasticStrainAtFracture
https://w3id.org/steel/ProcessOntology/TruePlasticStrainAtFracture
- description
- "true plastic strain at fracture" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTruePlasticStrainAtFracture
FailureStrainIdentifier4Temperature
https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier4Temperature
- description
- Load curve ID defining plastic failure strain as a function of temperature
- has super-classes
- ValueObject
- is in range of
- hasFailureStrainIdentifier4Temperature
MatPiecewiseLinearPlasticity
https://w3id.org/steel/ProcessOntology/MatPiecewiseLinearPlasticity
- description
- Simple incompressible plasticity model
- has super-classes
- ValueObject
- is in range of
- hasMatPiecewiseLinearPlasticity
StiffnessComponent
https://w3id.org/steel/ProcessOntology/StiffnessComponent
- description
- 11 component of stiffness matrix
- has super-classes
- ValueObject
- is in range of
- hasStiffnessComponent
MinimumCrossSectionAfterFracture
https://w3id.org/steel/ProcessOntology/MinimumCrossSectionAfterFracture
- description
- "minimum cross-sectional area after fracture" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasMinimumCrossSectionAfterFracture
Umschaltpunkt
https://w3id.org/steel/ProcessOntology/SwitchingPoint
FinalFlowStress_ginf
https://w3id.org/steel/ProcessOntology/FinalFlowStress_ginf
DAMASK phenopower law parameter
ElasticConstants_C11_C12_C44
https://w3id.org/steel/ProcessOntology/ElasticConstants_C11_C12_C44
AnisotropicYieldFunctionParameters
https://w3id.org/steel/ProcessOntology/AnisotropicYieldFunctionParameters
- description
- "Parameters of the anisotropic yield function considered" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasAnisotropicYieldFunctionParameters
CrossheadDisplacement
https://w3id.org/steel/ProcessOntology/CrossheadDisplacement
- description
- "Displacement of the actuator" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasCrossheadDisplacement
MinorTrueStrain
https://w3id.org/steel/ProcessOntology/MinorTrueStrain
- description
- "minor true strain" [DIN EN ISO 12004-2: 2021_07, 8]
- has super-classes
- ValueObject
- is in range of
- hasMinorTrueStrain
StrainRateFormulationFlag
https://w3id.org/steel/ProcessOntology/StrainRateFormulationFlag
- description
- Flag which determines the treatment of strain rate to evaluate yielding: =-1.0: Cowper-Symonds with effective deviatoric rate rather than total =0.0: Scale yield stress (default) =1.0: Viscoplastic formulation =3.0: Same as VP = 0, but with filtered effective total strain rates
- has super-classes
- ValueObject
- is in range of
- hasStrainRateFormulationFlag
QuenchLength%20
https://w3id.org/steel/ProcessOntology/QuenchLength%20
TruePlasticStrain
https://w3id.org/steel/ProcessOntology/TruePlasticStrain
- description
- "true plastic strain" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasTruePlasticStrain
time increment step
https://w3id.org/steel/ProcessOntology/TimeIncrementStep
GrainNumber
https://w3id.org/steel/ProcessOntology/GrainNumber
- description
- "Number of grains used for the microstructure model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasGrainNumber
Machine
https://w3id.org/steel/ProcessOntology/Machine
Data of the machine used for the experiment.
- description
- "Data of the machine used for the experiment." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasMachine
Stress
https://w3id.org/steel/ProcessOntology/Stress
- description
- "at any moment during the test, force divided by the original cross-sectional area, So, of the test piece" [DIN EN ISO 6892-1, 3.10]
- has super-classes
- ValueObject
- is in range of
- hasStress
PlasticEngineeringStrain
https://w3id.org/steel/ProcessOntology/PlasticEngineeringStrain
- description
- "plastic engineering strain " [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasPlasticEngineeringStrain
Workflow
https://w3id.org/steel/ProcessOntology/Workflow
- has sub-classes
- Simulation Workflow
- Digital workflow
- Experimental workflow
- is in domain of
- input
- output
- metadata
- executedBy
- parameters
- sequence
- environment
- steps
PressureChamber
https://w3id.org/steel/ProcessOntology/PressureChamber
- description
- "Pressure measred in the chamber." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasPressureChamber
material card
https://w3id.org/steel/ProcessOntology/MaterialCard
The MaterialCard is a digital representation of a real world steel; for example HCT980X. It contains all information to reproduce the behaviour steel within a simulation as close as possible to it's real world counter part.
- description
- "A material card contains material data or parameter to describe the material bahaviour in a simulation. " [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasMaterialCard
NumberOfHoles%20
https://w3id.org/steel/ProcessOntology/NumberOfHoles%20
Component test
https://w3id.org/steel/ProcessOntology/ComponentTest
InitialHardening
https://w3id.org/steel/ProcessOntology/InitialHardening
DynamometerArea
https://w3id.org/steel/ProcessOntology/DynamometerArea
- description
- "area on the fixed side of the test piece where only elastic deformations are required during the test" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasDynamometerArea
CharacteristicEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/CharacteristicEngineeringStrainRate
- description
- "Mean value of the time-dependent engineering strain rate in the range between start of yield or 1% strain and strain at maximum force" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasCharacteristicEngineeringStrainRate
Elongation
https://w3id.org/steel/ProcessOntology/Elongation
- description
- "increase in the original gauge length (3.1.1) at any moment during the test" [DIN EN ISO 6892-1, 3.3]
- has super-classes
- ValueObject
- is in range of
- hasElongation
InnerDiameterBlankHolder
https://w3id.org/steel/ProcessOntology/InnerDiameterBlankHolder
- description
- "Diameter of the blank holder (inner) of the testing machine." [DIN EN ISO 16808:2022-08, 4]
- has super-classes
- ValueObject
- is in range of
- hasInnerDiameterBlankHolder
Plasticity
https://w3id.org/steel/ProcessOntology/Plasticity
YieldStress
https://w3id.org/steel/ProcessOntology/YieldStress
- description
- Initial yield stress, if noidentifier for hardening curve (LCSS>0) is prescibed
- has super-classes
- ValueObject
- is in range of
- hasYieldStress
PoissonsRatio
https://w3id.org/steel/ProcessOntology/PoissonsRatio
Grain
https://w3id.org/steel/ProcessOntology/Grain
ReferenceTemperature
https://w3id.org/steel/ProcessOntology/ReferenceTemperature
- description
- Slope of linear hardening, if noidentifier for hardening curve (LCSS>0) is prescibed
- has super-classes
- ValueObject
- is in range of
- hasReferenceTemperature
InitialCriticalStrength
https://w3id.org/steel/ProcessOntology/InitialCriticalStrength
Texture
https://w3id.org/steel/ProcessOntology/Texture
- description
- "Texture of the microstructure model defined by three euler angles" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasTexture
Software
https://w3id.org/steel/ProcessOntology/Software
- description
- "Software used for measurement and post-processing." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasSoftware
User
https://w3id.org/steel/ProcessOntology/User
- description
- "Person performed the post-processing of the EBSD data." [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasUser
QuantityOfSand%20
https://w3id.org/steel/ProcessOntology/QuantityOfSand%20
Sensor
https://w3id.org/steel/ProcessOntology/Sensor
HardeningExponent
https://w3id.org/steel/ProcessOntology/HardeningExponent
- description
- List of hardening exponent
- has super-classes
- ValueObject
- is in range of
- hasHardeningExponent
MeasurementResolutionUncertainty
https://w3id.org/steel/ProcessOntology/MeasurementResolutionUncertainty
- description
- Measurement Resolution Uncertainty
- has super-classes
- ValueObject
- is in range of
- hasMeasurementResolutionUncertainty
TensileTestingMachine
https://w3id.org/steel/ProcessOntology/TensileTestingMachine
- description
- "Data of the machine used for the experiment." [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTensileTestingMachine
TruePlasticThicknessStrain
https://w3id.org/steel/ProcessOntology/TruePlasticThicknessStrain
- description
- "True plastic thickness strain received from post-processing the hydraulic bulge test." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasTruePlasticThicknessStrain
HX340LAD
https://w3id.org/steel/ProcessOntology/HX340LAD
HardeningModulus_h0
https://w3id.org/steel/ProcessOntology/HardeningModulus_h0
DAMASK phenopower law parameter
ProofStrengthTotalExtension
https://w3id.org/steel/ProcessOntology/ProofStrengthTotalExtension
- description
- "stress at which total extension (elastic extension plus plastic extension) is equal to a specified percentage of the extensometer gauge length" [DIN EN ISO 6892-1, 3.10.4]
- has super-classes
- ValueObject
- is in range of
- hasProofStrengthTotalExtension
Manufacturing
https://w3id.org/steel/ProcessOntology/Manufacturing
TestPieceProcessing
https://w3id.org/steel/ProcessOntology/TestPieceProcessing
StressExponent_n
https://w3id.org/steel/ProcessOntology/StressExponent_n
DAMASK phenopower law parameter
PrincipalStressLimit4PostProcessing
https://w3id.org/steel/ProcessOntology/PrincipalStressLimit4PostProcessing
- description
- Table ID with first principal stress limit as function of plastic strain (curves) and plastic strain rate (table). This option is for post-processing purposes only and gives an indication of areas in the structure where failure is likely to occur
- has super-classes
- ValueObject
- is in range of
- hasPrincipalStressLimit4PostProcessing
Hill48L
https://w3id.org/steel/ProcessOntology/Hill48L
Parameter L for Hill48 yield criterion
LubricationSystem
https://w3id.org/steel/ProcessOntology/LubricationSystem
- description
- "lubrication layer between specimen and punch" [DIN EN ISO 12004-2: 2021_07, 8]
- has super-classes
- ValueObject
- is in range of
- hasLubricationSystem
Tensile Test
https://w3id.org/steel/ProcessOntology/TensileTest
MaterialIdentifier
https://w3id.org/steel/ProcessOntology/MaterialIdentifier
- description
- A unique number or label to address the defined material
- has super-classes
- ValueObject
- is in range of
- hasMaterialIdentifier
Job
https://w3id.org/steel/ProcessOntology/Job
Restspannung
https://w3id.org/steel/ProcessOntology/RemainingStress
Tensile test meta data entry from BAM file
ProofStrengthPlasticExtension
https://w3id.org/steel/ProcessOntology/ProofStrengthPlasticExtension
- description
- "stress at which the plastic extension is equal to a specified percentage of the extensometer gauge length" [DIN EN ISO 6892-1, 3.10.3]
- has super-classes
- ValueObject
- is in range of
- hasProofStrengthPlasticExtension
TestingMachineUncertainty
https://w3id.org/steel/ProcessOntology/TestingMachineUncertainty
- description
- Testing Machine Uncertainty
- has super-classes
- ValueObject
- is in range of
- hasTestingMachineUncertainty
EvaluationMethod
https://w3id.org/steel/ProcessOntology/EvaluationMethod
- description
- "Evaluation method used for identification of the curvature and the average strain." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasEvaluationMethod
HoleToCapilarLengthRatio%20
https://w3id.org/steel/ProcessOntology/HoleToCapilarLengthRatio%20
roll gap
https://w3id.org/steel/ProcessOntology/rollGap
TestPiecePreparation
https://w3id.org/steel/ProcessOntology/TestPiecePreparation
- description
- Test Piece Preparation
- has super-classes
- ValueObject
- is in range of
- hasTestPiecePreparation
FormingLimitDiagram
https://w3id.org/steel/ProcessOntology/FormingLimitDiagram
TestPieceLength
https://w3id.org/steel/ProcessOntology/TestPieceLength
transverse direction
https://w3id.org/steel/ProcessOntology/transverseDirection
TemperatureSensor
https://w3id.org/steel/ProcessOntology/TemperatureSensor
Sensor to measure temperatur
Component
https://w3id.org/steel/ProcessOntology/Component
InventoryNumber
https://w3id.org/steel/ProcessOntology/InventoryNumber
FadingExponent
https://w3id.org/steel/ProcessOntology/FadingExponent
- description
- Exponent for damage-related stress fadeout: LT.0.0: |FADEXP| is a load curve ID defining element-size dependent fading exponent. GT.0.0: Constant fading exponent
- has super-classes
- ValueObject
- is in range of
- hasFadingExponent
Code
https://w3id.org/steel/ProcessOntology/Code
A external general simulation program. e.g. DAMASK or LAMMPS. A Code gets executed by a job
- has sub-classes
- Damask code
- Simulation Code
- is in domain of
- has output
- version
- has input
- is in range of
- uses Code
Discretization
https://w3id.org/steel/ProcessOntology/Discretization
- description
- "Discretization or rather number of elements used for the microstructure model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasDiscretization
Solver
https://w3id.org/steel/ProcessOntology/Solver
BrinellHardnessCRMAverage
https://w3id.org/steel/ProcessOntology/BrinellHardnessCRMAverage
- description
- CRM Average Brinell Hardness
- has super-classes
- ValueObject
- is in range of
- hasBrinellHardnessCRMAverage
CrossheadSeparationRate
https://w3id.org/steel/ProcessOntology/CrossheadSeparationRate
- description
- "The displacement of the crosshead per time" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasCrossheadSeparationRate
Hill48G
https://w3id.org/steel/ProcessOntology/Hill48G
Parameter G for Hill48 yield criterion
IndentationDiameterVertical
https://w3id.org/steel/ProcessOntology/IndentationDiameterVertical
- description
- Indentation Vertical Diameter
- has super-classes
- ValueObject
- is in range of
- hasIndentationDiameterVertical
rolling force
https://w3id.org/steel/ProcessOntology/rollingForce
ExtruderHeadPressure%20
https://w3id.org/steel/ProcessOntology/ExtruderHeadPressure%20
Rp02
https://w3id.org/steel/ProcessOntology/Rp02
Rp0,2 parameter
FLCDetermination
https://w3id.org/steel/ProcessOntology/FLCDetermination
Anfangsspannung
https://w3id.org/steel/ProcessOntology/InitialStress
Tensile test meta data entry from BAM file
ShearStrength
https://w3id.org/steel/ProcessOntology/ShearStrength
BrinellHardness
https://w3id.org/steel/ProcessOntology/BrinellHardness
MaterialInstabilityStrain
https://w3id.org/steel/ProcessOntology/MaterialInstabilityStrain
- description
- Critical plastic strain (material instability) LT.0.0: |ECRIT| is either a load curve ID defining critical equivalent plastic strain versus triaxiality or a table ID defining critical equivalent plastic strain as a function of triaxiality and Lode parameter (as in LCSDG). With HISVN ≠ 0, a 3D table can be used, where critical strain is a function of the history variable (TABLE_3D), Lode parameter (TABLE), and triaxiality (CURVE). With HISVN = 0, a 3D table introduces thermal effects, that is, critical strain is a function of temperature (TABLE_3D), Lode parameter (TABLE), and triaxiality (CURVE). EQ.0.0: Fixed value DCRIT defining critical damage is read (see below). GT.0.0: Fixed value for stress-state independent critical equivalent plastic strain.
- has super-classes
- ValueObject
- is in range of
- hasMaterialInstabilityStrain
DiameterAfterFracture1
https://w3id.org/steel/ProcessOntology/DiameterAfterFracture1
SampleIdentifier
https://w3id.org/steel/ProcessOntology/SampleIdentifier
Unique ID (IWM intern)
- description
- "Unique ID (IWM intern)" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasSampleIdentifier
MeanPlasticStrainRate
https://w3id.org/steel/ProcessOntology/MeanPlasticStrainRate
- description
- "mean value of the time dependent engineering strain rate: de(t)/dt in the range between start of yield point or 1% strain and strain ar maximum force" [ISO 26203-2, 2011, 4]
- has super-classes
- ValueObject
- is in range of
- hasMeanPlasticStrainRate
OriginalWidth
https://w3id.org/steel/ProcessOntology/OriginalWidth
Original width of the parallel length of a flat test piece
- description
- "original width of the parallel length of a flat test piece or average width of the longi tudinal strip taken from a tube or width of flat wire" [DIN EN ISO 6892-1, Table 1]
- has super-classes
- ValueObject
- is in range of
- hasOriginalWidth
GlassbendingProcess
https://w3id.org/steel/ProcessOntology/GlassbendingProcess
SampleProduction
https://w3id.org/steel/ProcessOntology/SampleProduction
- description
- "the production type for the manufactoring of the sample" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasSampleProduction
DefaultValue
https://w3id.org/steel/ProcessOntology/DefaultValue
- description
- "lower or upper value for stress respectively strain which is used for the description of the range where the modulus of elasticity is calculated" [DIN EN ISO 6892-1, 3.14]
- has super-classes
- ValueObject
- is in range of
- hasDefaultValue
BrinellHardnessCRMStandardDeviation
https://w3id.org/steel/ProcessOntology/BrinellHardnessCRMStandardDeviation
- description
- CRM Standard Deviation of Brinell Hardness
- has super-classes
- ValueObject
- is in range of
- hasBrinellHardnessCRMStandardDeviation
Clamping
https://w3id.org/steel/ProcessOntology/Clamping
RateSensitivityOfSlip
https://w3id.org/steel/ProcessOntology/RateSensitivityOfSlip
- description
- "Rate sensivity of slip used in the crystal plasticity constitutive model" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasRateSensitivityOfSlip
Grid
https://w3id.org/steel/ProcessOntology/Grid
- description
- "Type of grid used for DIC measurements." [DIN EN ISO 16808:2022-08, 12]
- has super-classes
- ValueObject
- is in range of
- hasGrid
TestStandard
https://w3id.org/steel/ProcessOntology/TestStandard
The norm according to which the experiment was conducted.
- description
- "Test standard to which the test is referred" [Authors]
- has super-classes
- ValueObject
- is in range of
- hasTestStandard
ThicknessAfterFracture2
https://w3id.org/steel/ProcessOntology/ThicknessAfterFracture2
Time series simulation
https://w3id.org/steel/ProcessOntology/TimeSeriesSimulation
A Simulation that return a time Series
RValue
https://w3id.org/steel/ProcessOntology/RValue
MachineLearning
https://w3id.org/steel/ProcessOntology/MachineLearning
Process chain simulation
https://w3id.org/steel/ProcessOntology/processChainSimulation
TestDirection
https://w3id.org/steel/ProcessOntology/TestDirection
MatTabulatedJohnsonCook
https://w3id.org/steel/ProcessOntology/MatTabulatedJohnsonCook
- description
- Simple incompressible plasticity model with adiabatic approach
- has super-classes
- ValueObject
- is in range of
- hasMatTabulatedJohnsonCook
TestNumber
https://w3id.org/steel/ProcessOntology/TestNumber
rolling speed
https://w3id.org/steel/ProcessOntology/rollingSpeed
Location
https://w3id.org/steel/ProcessOntology/Location
ExtensometerGaugeLength
https://w3id.org/steel/ProcessOntology/ExtensometerGaugeLength
The intial gauge length used for measurement of extension by means of an extensometer
- description
- "initial extensometer gauge length used for measurement of extension by means of an extensometer" [DIN EN ISO 6892-1, 3.5]
- has super-classes
- ValueObject
- is in range of
- hasExtensometerGaugeLength
BrinellHardnessUncertainty
https://w3id.org/steel/ProcessOntology/BrinellHardnessUncertainty
- description
- Brinell Hardness Uncertainty
- has super-classes
- ValueObject
- is in range of
- hasBrinellHardnessUncertainty
EffectiveStress
https://w3id.org/steel/ProcessOntology/EffectiveStress
- description
- "Effective stress data of the microstructure simulation caried out" [General Knowledge]
- has super-classes
- ValueObject
- is in range of
- hasEffectiveStress
rolling direction
https://w3id.org/steel/ProcessOntology/rollingDirection
True Strain
https://w3id.org/steel/ProcessOntology/TrueStrain
PercentageElongationAfterFracture
https://w3id.org/steel/ProcessOntology/PercentageElongationAfterFracture
- description
- "permanent elongation of the gauge length after fracture, (Lu − Lo), expressed as a percentage of the original gauge length (3.1.1)" [DIN EN ISO 6892-1, 3.4.2]
- has super-classes
- ValueObject
- is in range of
- hasPercentageElongationAfterFracture
ExtruderSpeed%20
https://w3id.org/steel/ProcessOntology/ExtruderSpeed%20
StrainRateScaleParameterC
https://w3id.org/steel/ProcessOntology/StrainRateScaleParameterC
- description
- Parameter C for strain rate approach for using the Cowper and Symonds model which scales the yield stress with the factor: 1+(epsDot/C)^(1/P)
- has super-classes
- ValueObject
- is in range of
- hasStrainRateScaleParameterC
Extension
https://w3id.org/steel/ProcessOntology/Extension
- description
- "increase in the extensometer gauge length (3.5), at any moment during the test" [DIN EN ISO 6892-1, 3.6]
- has super-classes
- ValueObject
- is in range of
- hasExtension
FailureStrainIdentifier
https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier
- description
- The load curve ID defines plastic failure strain as a function of triaxiality. The table ID defines for each Lode parameter a load curve ID giving the plastic failure strain versus triaxiality for that Lode parameter
- has super-classes
- ValueObject
- is in range of
- hasFailureStrainIdentifier
rolling mill
https://w3id.org/steel/ProcessOntology/RollingMill
FailureStrainIdentifier4MeshDependency
https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier4MeshDependency
- description
- The load curve ID defines plastic failure strain as a function of element size. The table ID defines for each triaxiality a load curve ID giving the plastic failure strain versus element size for that triaxiality. If a three dimensional table ID is referred, plastic failure strain can be a function of Lode parameter (TABLE_ 3D), triaxiality (TABLE), and element size (CURVE)
- has super-classes
- ValueObject
- is in range of
- hasFailureStrainIdentifier4MeshDependency
SEM
https://w3id.org/steel/ProcessOntology/SEM
RDF Properties
has ReferenceShearRate
https://w3id.org/steel/ProcessOntology/hasReferenceShearRate_PER-SEC
has Width
https://w3id.org/steel/ProcessOntology/hasWidth_MilliM
has LatticeStructure
https://w3id.org/steel/ProcessOntology/hasLatticeStructure
has NumberSlipSystems
https://w3id.org/steel/ProcessOntology/hasNumberSlipSystems_UNITLESS
has AnisotropicYieldFunctionParameters
https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunctionParameters
has BlankHolderForce
https://w3id.org/steel/ProcessOntology/hasBlankHolderForce_KiloN
has ForceMeasuringSystem
https://w3id.org/steel/ProcessOntology/hasForceMeasuringSystem
has TrueTotalStrain
https://w3id.org/steel/ProcessOntology/hasTrueTotalStrain_UNITLESS
has Work
https://w3id.org/steel/ProcessOntology/hasWork_KiloJ
has MinTimeStep4ElementDel
https://w3id.org/steel/ProcessOntology/hasMinTimeStep4ElementDel_SEC
has Grid
https://w3id.org/steel/ProcessOntology/hasGrid
has SampleCode
https://w3id.org/steel/ProcessOntology/hasSampleCode
has PercentageTotalExtensionAtFracture
https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtFracture_PERCENT
has ElasticityModel
https://w3id.org/steel/ProcessOntology/hasElasticityModel
has ExperimentIdentifier
https://w3id.org/steel/ProcessOntology/hasExperimentIdentifier
has EulerAngle3
https://w3id.org/steel/ProcessOntology/hasEulerAngle3
has PostProcessingSoftware
https://w3id.org/steel/ProcessOntology/hasPostProcessingSoftware
has Force
https://w3id.org/steel/ProcessOntology/hasForce_N
has ShearLengthAfterFracture2
https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture2_MilliM
has MajorTrueStrain
https://w3id.org/steel/ProcessOntology/hasMajorTrueStrain
has ForceMeasuringDevice
https://w3id.org/steel/ProcessOntology/hasForceMeasuringDevice
has MassDensity
https://w3id.org/steel/ProcessOntology/hasMassDensity_GM-PER-CentiM3
has DamageThreshold
https://w3id.org/steel/ProcessOntology/hasDamageThreshold_UNITLESS
has MeanEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasMeanEngineeringStrainRate_PER-SEC
has InnerDiameterDie
https://w3id.org/steel/ProcessOntology/hasInnerDiameterDie_MilliM
has PlasticEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasPlasticEngineeringStrain_PERCENT
has HX340LAD
https://w3id.org/steel/ProcessOntology/hasHX340LAD
has PercentagePermanentElongation
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentElongation_PERCENT
has RadiusCurvature
https://w3id.org/steel/ProcessOntology/hasRadiusCurvature_MilliM
has DeliveryDate
https://w3id.org/steel/ProcessOntology/hasDeliveryDate
has ThicknessAfterFracture2
https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture2_MilliM
has MaximumForce
https://w3id.org/steel/ProcessOntology/hasMaximumForce_KiloN
has ComplexPhaseSteel
https://w3id.org/steel/ProcessOntology/hasComplexPhaseSteel
has MildSteel
https://w3id.org/steel/ProcessOntology/hasMildSteel
has HCT980X
https://w3id.org/steel/ProcessOntology/hasHCT980X
has Tester
https://w3id.org/steel/ProcessOntology/hasTester
has PercentageTotalExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtMaximumForce_PERCENT
has EulerAngleConvention
https://w3id.org/steel/ProcessOntology/hasEulerAngleConvention
has PercentageExtension
https://w3id.org/steel/ProcessOntology/hasPercentageExtension_UNITLESS
has Diameter
https://w3id.org/steel/ProcessOntology/hasDiameter_MilliM
has CrossheadSeparationRate
https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRate_MilliM-PER-SEC
has BatchNumber
https://w3id.org/steel/ProcessOntology/hasBatchNumber
has StrainRateScaleParameterP
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterP_UNITLESS
has EngineeringStrain
https://w3id.org/steel/ProcessOntology/hasEngineeringStrain_PERCENT
has TruePlasticStrain
https://w3id.org/steel/ProcessOntology/hasTruePlasticStrain_UNITLESS
has OriginalDiameter
https://w3id.org/steel/ProcessOntology/hasOriginalDiameter_MilliM
has ProofStrength_1Percentage
https://w3id.org/steel/ProcessOntology/hasProofStrength_1Percentage_MegaPA
has MeasuringDevice
https://w3id.org/steel/ProcessOntology/hasMeasuringDevice
has RateSensitivityOfSlip
https://w3id.org/steel/ProcessOntology/hasRateSensitivityOfSlip_UNITLESS
has PunchDiameter
https://w3id.org/steel/ProcessOntology/hasPunchDiameter_MilliM
has HardeningParameterTau0
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau0_MegaPA
has Clamping
https://w3id.org/steel/ProcessOntology/hasClamping
has DamageExponent
https://w3id.org/steel/ProcessOntology/hasDamageExponent_UNITLESS
has Steel
https://w3id.org/steel/ProcessOntology/hasSteel
has AmplitudeFile
https://w3id.org/steel/ProcessOntology/hasAmplitudeFile
has SpecificPlasticWorkValue
https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWorkValue
has PlasticityModel
https://w3id.org/steel/ProcessOntology/hasPlasticityModel
has EbsdFileName
https://w3id.org/steel/ProcessOntology/hasEbsdFileName
has DiameterAfterFracture1
https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture1_MilliM
has SerialNumber
https://w3id.org/steel/ProcessOntology/hasSerialNumber
has TestPiece
https://w3id.org/steel/ProcessOntology/hasTestPiece
has PreliminaryForce
https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_KiloN
has DieTool
https://w3id.org/steel/ProcessOntology/hasDieTool
has ModulusOfElasticity
https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_MegaPA
has TestDirection
https://w3id.org/steel/ProcessOntology/hasTestDirection
has HardeningExponent
https://w3id.org/steel/ProcessOntology/hasHardeningExponent_UNITLESS
has ElasticConstantC11
https://w3id.org/steel/ProcessOntology/hasElasticConstantC11_MegaPA
has NumberFailedIntegrationPoints
https://w3id.org/steel/ProcessOntology/hasNumberFailedIntegrationPoints_UNITLESS
has LatentHardeningQ0
https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ0_UNITLESS
has MinimumCrosssectionAfterFracture
https://w3id.org/steel/ProcessOntology/hasMinimumCrosssectionAfterFracture_MilliM2
has MatTabulatedJohnsonCookLogInterpolation
https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCookLogInterpolation
has NotchTensileStrength
https://w3id.org/steel/ProcessOntology/hasNotchTensileStrength_MegaPA
has ReferenceShearRate
https://w3id.org/steel/ProcessOntology/hasReferenceShearRate_UNITLESS
has MaterialClass
https://w3id.org/steel/ProcessOntology/hasMaterialClass
has Discretization
https://w3id.org/steel/ProcessOntology/hasDiscretization
has ElasticConstantC44
https://w3id.org/steel/ProcessOntology/hasElasticConstantC44_MegaPA
has Radius
https://w3id.org/steel/ProcessOntology/hasRadius_MilliM
has BrinellHardnessCRMAverage
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessCRMAverage_HBW
has GaugeLength
https://w3id.org/steel/ProcessOntology/hasGaugeLength_MilliM
has CrossheadDisplacement
https://w3id.org/steel/ProcessOntology/hasCrossheadDisplacement_MilliM
has MaximumSpeed
https://w3id.org/steel/ProcessOntology/hasMaximumSpeed
has YoungsModulus
https://w3id.org/steel/ProcessOntology/hasYoungsModulus_MegaPA
has DisplacementTransducer
https://w3id.org/steel/ProcessOntology/hasDisplacementTransducer
has NumberGrains
https://w3id.org/steel/ProcessOntology/hasNumberGrains
has ForceAtFracture
https://w3id.org/steel/ProcessOntology/hasForceAtFracture
has OriginalWidth
https://w3id.org/steel/ProcessOntology/hasOriginalWidth_MilliM
has TruePlasticStrainAtFracture
https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainAtFracture_PERCENT
has FormingLimitCurve
https://w3id.org/steel/ProcessOntology/hasFormingLimitCurve
has TestTemperature
https://w3id.org/steel/ProcessOntology/hasTestTemperature_DEG_C
has MeanPlasticStrainRate
https://w3id.org/steel/ProcessOntology/hasMeanPlasticStrainRate_PER-SEC
has SampleIdentifier-2
https://w3id.org/steel/ProcessOntology/hasSampleIdentifier-2
has Composition
https://w3id.org/steel/ProcessOntology/hasComposition
has StrainRate
https://w3id.org/steel/ProcessOntology/hasStrainRate_PER-SEC
has TangentYieldModulus
https://w3id.org/steel/ProcessOntology/hasTangentYieldModulus_MegaPA
has LatentHardeningQ1
https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ1_UNITLESS
has BrinellHardness
https://w3id.org/steel/ProcessOntology/hasBrinellHardness_HBW
has BrinellHardnessAverage
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessAverage_HBW
has OriginalCrossSection
https://w3id.org/steel/ProcessOntology/hasOriginalCrossSection_MilliM2
has TrueStressAtFracture
https://w3id.org/steel/ProcessOntology/hasTrueStressAtFracture_MegaPA
has NominalEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasNominalEngineeringStrainRate_PER-SEC
has StandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/hasStandardDeviationOfTheSlope_MegaPA
has DX56D
https://w3id.org/steel/ProcessOntology/hasDX56D
has Machine
https://w3id.org/steel/ProcessOntology/hasMachine
has Supplier
https://w3id.org/steel/ProcessOntology/hasSupplier
has MaximumForce
https://w3id.org/steel/ProcessOntology/hasMaximumForce_N
has MatTabulatedJohnsonCook
https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCook
has CoefficientOfCorrelation
https://w3id.org/steel/ProcessOntology/hasCoefficientOfCorrelation_UNITLESS
has HomogenizationModel
https://w3id.org/steel/ProcessOntology/hasHomogenizationModel
has MaximumForceNoDiscontinousYielding
https://w3id.org/steel/ProcessOntology/hasMaximumForceNoDiscontinousYielding_N
has TimeStamp
https://w3id.org/steel/ProcessOntology/hasTimeStamp
has PercentageReductionOfArea
https://w3id.org/steel/ProcessOntology/hasPercentageReductionOfArea_PERCENT
has CameraSystem
https://w3id.org/steel/ProcessOntology/hasCameraSystem
has Remark
https://w3id.org/steel/ProcessOntology/hasRemark
has Texture
https://w3id.org/steel/ProcessOntology/hasTexture
has FailureCriteriaTypeAdd4StrainAverage
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4StrainAverage_UNITLESS
has TestStandard
https://w3id.org/steel/ProcessOntology/hasTestStandard
has DrawingSpeed
https://w3id.org/steel/ProcessOntology/hasDrawingSpeed_MilliM-PER-MIN
has ShearLengthAfterFracture1
https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture1_MilliM
has FEMSolver
https://w3id.org/steel/ProcessOntology/hasFEMSolver
has DualPhaseSteel
https://w3id.org/steel/ProcessOntology/hasDualPhaseSteel
has MeasuringAid
https://w3id.org/steel/ProcessOntology/hasMeasuringAid
has LowerYieldStrength
https://w3id.org/steel/ProcessOntology/hasLowerYieldStrength_MegaPA
has TrueFractureStrain
https://w3id.org/steel/ProcessOntology/hasTrueFractureStrain
has CalibrationStatus
https://w3id.org/steel/ProcessOntology/hasCalibrationStatus
has SampleType
https://w3id.org/steel/ProcessOntology/hasSampleType
has DynamometerArea
https://w3id.org/steel/ProcessOntology/hasDynamometerArea_MilliM2
has ParallelLength
https://w3id.org/steel/ProcessOntology/hasParallelLength_MilliM
has InitialSheetThickness
https://w3id.org/steel/ProcessOntology/hasInitialSheetThickness_MilliM
has BrinellHardnessUncertainty
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessUncertainty_HBW
has FailureTreatment
https://w3id.org/steel/ProcessOntology/hasFailureTreatment_UNITLESS
has ThicknessAfterFracture1
https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture1_MilliM
has PreliminaryForce
https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_MegaPA
has MeasurementResolutionUncertainty
https://w3id.org/steel/ProcessOntology/hasMeasurementResolutionUncertainty_HBW
has HardeningLaw
https://w3id.org/steel/ProcessOntology/hasHardeningLaw
has EulerAngle2
https://w3id.org/steel/ProcessOntology/hasEulerAngle2
has PermissibleUncertainty
https://w3id.org/steel/ProcessOntology/hasPermissibleUncertainty_UNITLESS
has PercentageElongation
https://w3id.org/steel/ProcessOntology/hasPercentageElongation_MilliM
has ShearStrength
https://w3id.org/steel/ProcessOntology/hasShearStrength_MegaPA
has CalibrationComponents
https://w3id.org/steel/ProcessOntology/hasCalibrationComponents
has TestPieceLength
https://w3id.org/steel/ProcessOntology/hasTestPieceLength_MilliM
has LubricationSystem
https://w3id.org/steel/ProcessOntology/hasLubricationSystem
has FailureCriteriaTypeAdd4ElementDeletion
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4ElementDeletion_UNITLESS
has ReferenceTemperature
https://w3id.org/steel/ProcessOntology/hasReferenceTemperature_K
has InventoryNumber
https://w3id.org/steel/ProcessOntology/hasInventoryNumber
has ComputerControlledTensileTestingMachine
https://w3id.org/steel/ProcessOntology/hasComputerControlledTensileTestingMachine
has YieldStress
https://w3id.org/steel/ProcessOntology/hasYieldStress_MegaPA
has StrainRateScaleParameterC
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterC_UNITLESS
has IndentationDiameterVertical
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterVertical_MilliM
has TaylorQuinneyCoefficient
https://w3id.org/steel/ProcessOntology/hasTaylorQuinneyCoefficient_UNITLESS
has CrystalPlasticityConstitutiveModel
https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityConstitutiveModel
has Software
https://w3id.org/steel/ProcessOntology/hasSoftware
has HardeningParameterTheta1
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta1_MegaPA
has SpecificHeatCapacity
https://w3id.org/steel/ProcessOntology/hasSpecificHeatCapacity_J-Per-Gm-K
has InitialThickness
https://w3id.org/steel/ProcessOntology/hasInitialThickness_MilliM
has UpperYieldStrength
https://w3id.org/steel/ProcessOntology/hasUpperYieldStrength_MegaPA
has Identifier
https://w3id.org/steel/ProcessOntology/hasIdentifier
has ResultsFile
https://w3id.org/steel/ProcessOntology/hasResultsFile
has TestPieceProcessing
https://w3id.org/steel/ProcessOntology/hasTestPieceProcessing
has DamageTreatment
https://w3id.org/steel/ProcessOntology/hasDamageTreatment_UNITLESS
has MaximumForceDiscontinousYielding
https://w3id.org/steel/ProcessOntology/hasMaximumForceDiscontinousYielding_N
has TrueStress
https://w3id.org/steel/ProcessOntology/hasTrueStress_MegaPA
has NumberOfVirtualExperiments
https://w3id.org/steel/ProcessOntology/hasNumberOfVirtualExperiments
has EffectiveStress
https://w3id.org/steel/ProcessOntology/hasEffectiveStress_MegaPA
has TargetClampingForce
https://w3id.org/steel/ProcessOntology/hasTargetClampingForce_KiloN
has TestPiecePreparation
https://w3id.org/steel/ProcessOntology/hasTestPiecePreparation
has SheetThickness
https://w3id.org/steel/ProcessOntology/hasSheetThickness
has FormingLimitDiagram
https://w3id.org/steel/ProcessOntology/hasFormingLimitDiagram
has RelativeStandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/hasRelativeStandardDeviationOfTheSlope_PERCENT
has InnerDiameterBlankHolder
https://w3id.org/steel/ProcessOntology/hasInnerDiameterBlankHolder_MilliM
has TrueStrain
https://w3id.org/steel/ProcessOntology/hasTrueStrain_UNITLESS
has FrameRate
https://w3id.org/steel/ProcessOntology/hasFrameRate_PER-SEC
has PoissonsRatio
https://w3id.org/steel/ProcessOntology/hasPoissonsRatio_UNITLESS
has MatPiecewiseLinearPlasticity
https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticity
has BiaxialStress
https://w3id.org/steel/ProcessOntology/hasBiaxialStress_MegaPA
has Time
https://w3id.org/steel/ProcessOntology/hasTime_SEC
has PercentagePermanentExtension
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_UNITLESS
has TensileTestingMachine
https://w3id.org/steel/ProcessOntology/hasTensileTestingMachine
has FinalGaugeLengthAfterFracture
https://w3id.org/steel/ProcessOntology/hasFinalGaugeLengthAfterFracture_MilliM
has ShearLength
https://w3id.org/steel/ProcessOntology/hasShearLength_MilliM
has PercentageYieldPointExtension
https://w3id.org/steel/ProcessOntology/hasPercentageYieldPointExtension_PERCENT
has Extension
https://w3id.org/steel/ProcessOntology/hasExtension_MilliM
has TestPieceIdentifier
https://w3id.org/steel/ProcessOntology/hasTestPieceIdentifier
has WidthAfterFracture2
https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture2_MilliM
has ReferenceElementSize
https://w3id.org/steel/ProcessOntology/hasReferenceElementSize_MilliM
has PunchDisplacement
https://w3id.org/steel/ProcessOntology/hasPunchDisplacement_MilliM
has Location
https://w3id.org/steel/ProcessOntology/hasLocation
has OriginalThickness
https://w3id.org/steel/ProcessOntology/hasOriginalThickness_MilliM
has GrainNumber
https://w3id.org/steel/ProcessOntology/hasGrainNumber
has ModulusOfElasticity
https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_GigaPA
has PercentageElongation
https://w3id.org/steel/ProcessOntology/hasPercentageElongation_PERCENT
has TestPieceThickness
https://w3id.org/steel/ProcessOntology/hasTestPieceThickness
has BoundaryFile
https://w3id.org/steel/ProcessOntology/hasBoundaryFile
has DataSamplingFrequency
https://w3id.org/steel/ProcessOntology/hasDataSamplingFrequency
has PoissonRatio
https://w3id.org/steel/ProcessOntology/hasPoissonRatio_UNITLESS
has TestTime
https://w3id.org/steel/ProcessOntology/hasTestTime_SEC
has TestingDirection
https://w3id.org/steel/ProcessOntology/hasTestingDirection
has YieldStrength
https://w3id.org/steel/ProcessOntology/hasYieldStrength_MegaPA
has ProofStrengthTotalExtension
https://w3id.org/steel/ProcessOntology/hasProofStrengthTotalExtension_MegaPA
has TestPieceComposition
https://w3id.org/steel/ProcessOntology/hasTestPieceComposition
has IndenterIdentifier
https://w3id.org/steel/ProcessOntology/hasIndenterIdentifier
has Repetition
https://w3id.org/steel/ProcessOntology/hasRepetition_MilliM
has TrueWidthStrain
https://w3id.org/steel/ProcessOntology/hasTrueWidthStrain_UNITLESS
has TransitionRadius
https://w3id.org/steel/ProcessOntology/hasTransitionRadius_MilliM
has OriginalCrosssection
https://w3id.org/steel/ProcessOntology/hasOriginalCrosssection_MilliM2
has Fracture
https://w3id.org/steel/ProcessOntology/hasFracture
has MeasuringRange
https://w3id.org/steel/ProcessOntology/hasMeasuringRange
has TotalEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasTotalEngineeringStrain_PERCENT
has SlipSystemNumber
https://w3id.org/steel/ProcessOntology/hasSlipSystemNumber
has Force
https://w3id.org/steel/ProcessOntology/hasForce_KiloN
has RValue
https://w3id.org/steel/ProcessOntology/hasRValue_UNITLESS
has TrueThicknessStrain
https://w3id.org/steel/ProcessOntology/hasTrueThicknessStrain
has Strain
https://w3id.org/steel/ProcessOntology/hasStrain_PERCENT
has PistonSpeed
https://w3id.org/steel/ProcessOntology/hasPistonSpeed_MilliM-PER-SEC
has IndentationDiameterHorizontal
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterHorizontal_MilliM
has HCT980C
https://w3id.org/steel/ProcessOntology/hasHCT980C
has ExtensionMeasuringSystem
https://w3id.org/steel/ProcessOntology/hasExtensionMeasuringSystem
has MicrostructureModel
https://w3id.org/steel/ProcessOntology/hasMicrostructureModel
has CharacteristicEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasCharacteristicEngineeringStrainRate_PER-SEC
has PercentagePermanentExtension
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_PERCENT
has TestingMachineUncertainty
https://w3id.org/steel/ProcessOntology/hasTestingMachineUncertainty_UNITLESS
has EstimatedStrainRateOverTheParallelLength
https://w3id.org/steel/ProcessOntology/hasEstimatedStrainRateOverTheParallelLength_PER-SEC
has TotalLength
https://w3id.org/steel/ProcessOntology/hasTotalLength_MilliM
has CrossHardeningParameter
https://w3id.org/steel/ProcessOntology/hasCrossHardeningParameter_UNITLESS
has AnisotropicYieldFunction
https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunction
has PressureChamber
https://w3id.org/steel/ProcessOntology/hasPressureChamber_MegaPA
has PermanentSetStrength
https://w3id.org/steel/ProcessOntology/hasPermanentSetStrength_MegaPA
has InitialDisplacementRate
https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRate_MilliM-PER-SEC
has GridSize
https://w3id.org/steel/ProcessOntology/hasGridSize_MilliM
has BrinellHardnessStandardDeviation
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessStandardDeviation_HBW
has CRMUncertainty
https://w3id.org/steel/ProcessOntology/hasCRMUncertainty_UNITLESS
has CrystalPlasticityParameterFile
https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityParameterFile
has TrueFractureStress
https://w3id.org/steel/ProcessOntology/hasTrueFractureStress_MegaPA
has TensileStrength
https://w3id.org/steel/ProcessOntology/hasTensileStrength_MegaPA
has ProofStrengthPlasticExtension
https://w3id.org/steel/ProcessOntology/hasProofStrengthPlasticExtension_MegaPA
has Material
https://w3id.org/steel/ProcessOntology/hasMaterial
has MAT_ADD_DAMAGE_GISSMO
https://w3id.org/steel/ProcessOntology/hasMAT_ADD_DAMAGE_GISSMO
has ExtensometerGaugeLength
https://w3id.org/steel/ProcessOntology/hasExtensometerGaugeLength_MilliM
has EvaluationMethod
https://w3id.org/steel/ProcessOntology/hasEvaluationMethod
has IndentationDiameterAverage
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterAverage_MilliM
has SpecimenWidth
https://w3id.org/steel/ProcessOntology/hasSpecimenWidth_MilliM
has HardeningParameterTau1
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau1_MegaPA
has SlopeElasticPartStressStrainCurve
https://w3id.org/steel/ProcessOntology/hasSlopeElasticPartStressStrainCurve_MegaPA
has Inv_ShearRateSensitivity
https://w3id.org/steel/ProcessOntology/hasInv_ShearRateSensitivity_UNITLESS
has MatPiecewiseLinearPlasticityLogInterpolation
https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticityLogInterpolation
has SampleInfos
https://w3id.org/steel/ProcessOntology/hasSampleInfos
has HardeningParameterTheta0
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta0_MegaPA
has MaterialCard
https://w3id.org/steel/ProcessOntology/hasMaterialCard
has SpecimenCrossSection
https://w3id.org/steel/ProcessOntology/hasSpecimenCrossSection
has MicroalloyedSteel
https://w3id.org/steel/ProcessOntology/hasMicroalloyedSteel
has YieldForce_0.2Percentage
https://w3id.org/steel/ProcessOntology/hasYieldForce_0.2Percentage_KiloN
has DiameterAfterFracture2
https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture2_MilliM
has FLCDetermination
https://w3id.org/steel/ProcessOntology/hasFLCDetermination
has EulerAngle1
https://w3id.org/steel/ProcessOntology/hasEulerAngle1
has TestingRate
https://w3id.org/steel/ProcessOntology/hasTestingRate
has FadingExponent
https://w3id.org/steel/ProcessOntology/hasFadingExponent_UNITLESS
has WidthChange
https://w3id.org/steel/ProcessOntology/hasWidthChange_MilliM
has SampleIdentifier
https://w3id.org/steel/ProcessOntology/hasSampleIdentifier
has Grade
https://w3id.org/steel/ProcessOntology/hasGrade
has SampleProduction
https://w3id.org/steel/ProcessOntology/hasSampleProduction
has ExtensionAtFracture
https://w3id.org/steel/ProcessOntology/hasExtensionAtFracture_MilliM
has InteractionMatrix
https://w3id.org/steel/ProcessOntology/hasInteractionMatrix_UNITLESS
has PercentageElongationAfterFracture
https://w3id.org/steel/ProcessOntology/hasPercentageElongationAfterFracture_PERCENT
has TestPieceGeometry
https://w3id.org/steel/ProcessOntology/hasTestPieceGeometry
has TimeDependentEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasTimeDependentEngineeringStrainRate_PER-SEC
has ProofStrength_0.2Percentage
https://w3id.org/steel/ProcessOntology/hasProofStrength_0.2Percentage_MegaPA
has OriginalGaugeLength
https://w3id.org/steel/ProcessOntology/hasOriginalGaugeLength_MilliM
has ElasticConstantC12
https://w3id.org/steel/ProcessOntology/hasElasticConstantC12_MegaPA
has PercentagePlasticExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/hasPercentagePlasticExtensionAtMaximumForce_PERCENT
has SpecificPlasticWork
https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWork
has TruePlasticThicknessStrain
https://w3id.org/steel/ProcessOntology/hasTruePlasticThicknessStrain
has BrinellHardnessCRMStandardDeviation
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessCRMStandardDeviation_HBW
has StrainRateFormulationFlag
https://w3id.org/steel/ProcessOntology/hasStrainRateFormulationFlag
has Elongation
https://w3id.org/steel/ProcessOntology/hasElongation_MilliM
has PunchVelocity
https://w3id.org/steel/ProcessOntology/hasPunchVelocity_MilliM-PER-SEC
has MinimumCrossSectionAfterFracture
https://w3id.org/steel/ProcessOntology/hasMinimumCrossSectionAfterFracture_MilliM2
has User
https://w3id.org/steel/ProcessOntology/hasUser
has EffecticStrain
https://w3id.org/steel/ProcessOntology/hasEffecticStrain_UNITLESS
has Displacement
https://w3id.org/steel/ProcessOntology/hasDisplacement_MilliM
has WidthStrain
https://w3id.org/steel/ProcessOntology/hasWidthStrain_UNITLESS
has Operator
https://w3id.org/steel/ProcessOntology/hasOperator
has EngineeringStress
https://w3id.org/steel/ProcessOntology/hasEngineeringStress_MegaPA
has Empty
https://w3id.org/steel/ProcessOntology/hasEmpty
has TestTemperatur
https://w3id.org/steel/ProcessOntology/hasTestTemperatur
has WidthAfterFracture1
https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture1_MilliM
has MinorTrueStrain
https://w3id.org/steel/ProcessOntology/hasMinorTrueStrain
has ClampingForce
https://w3id.org/steel/ProcessOntology/hasClampingForce_N
has Laboratory
https://w3id.org/steel/ProcessOntology/hasLaboratory
has AbsoluteCrossheadTravel
https://w3id.org/steel/ProcessOntology/hasAbsoluteCrossheadTravel_MilliM
has DefaultValue
https://w3id.org/steel/ProcessOntology/hasDefaultValue
has RadiusDie
https://w3id.org/steel/ProcessOntology/hasRadiusDie_MilliM
has Stress
https://w3id.org/steel/ProcessOntology/hasStress_MegaPA
has RollingDirection
https://w3id.org/steel/ProcessOntology/hasRollingDirection
has TotalAverageDiameter
https://w3id.org/steel/ProcessOntology/hasTotalAverageDiameter_MilliM
has HardeningCurve
https://w3id.org/steel/ProcessOntology/hasHardeningCurve
has TestPieceProducer
https://w3id.org/steel/ProcessOntology/hasTestPieceProducer
Object Properties
hasStrainRateScaleIdendifier
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleIdendifier_Object
hasPrincipalStressLimit4PostProcessing
https://w3id.org/steel/ProcessOntology/hasPrincipalStressLimit4PostProcessing_Object
hasProjectName
https://w3id.org/steel/ProcessOntology/hasProjectName_Object
hasMatPiecewiseLinearPlasticity
https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticity_Object
hasTrueThicknessStrain
https://w3id.org/steel/ProcessOntology/hasTrueThicknessStrain_Object
hasTexture
https://w3id.org/steel/ProcessOntology/hasTexture_Object
hasFailureCriteriaTypeAdd4StrainAverage
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4StrainAverage_Object
hasClamping
https://w3id.org/steel/ProcessOntology/hasClamping_Object
hasRValue
https://w3id.org/steel/ProcessOntology/hasRValue_Object
hasForceMeasuringSystem
https://w3id.org/steel/ProcessOntology/hasForceMeasuringSystem_Object
hasDiameterAfterFracture2
https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture2_Object
has output
https://w3id.org/steel/ProcessOntology/hasOutput
has unit
https://w3id.org/steel/ProcessOntology/hasUnit
hasWidthChange
https://w3id.org/steel/ProcessOntology/hasWidthChange_Object
hasShearStrength
https://w3id.org/steel/ProcessOntology/hasShearStrength_Object
hasProofStrength_0.2Percentage
https://w3id.org/steel/ProcessOntology/hasProofStrength_0.2Percentage_Object
hasPercentageReductionOfArea
https://w3id.org/steel/ProcessOntology/hasPercentageReductionOfArea_Object
hasCameraSystem
https://w3id.org/steel/ProcessOntology/hasCameraSystem_Object
hasInventoryNumber
https://w3id.org/steel/ProcessOntology/hasInventoryNumber_Object
hasTimeStamp
https://w3id.org/steel/ProcessOntology/hasTimeStamp_Object
hasMinimumCrossSectionAfterFracture
https://w3id.org/steel/ProcessOntology/hasMinimumCrossSectionAfterFracture_Object
hasExtensionAtFracture
https://w3id.org/steel/ProcessOntology/hasExtensionAtFracture_Object
hasTaylorQuinneyCoefficient
https://w3id.org/steel/ProcessOntology/hasTaylorQuinneyCoefficient_Object
hasElasticConstantC12
https://w3id.org/steel/ProcessOntology/hasElasticConstantC12_Object
hasMaterialCard
https://w3id.org/steel/ProcessOntology/hasMaterialCard_Object
hasMAT_ADD_DAMAGE_GISSMO
https://w3id.org/steel/ProcessOntology/hasMAT_ADD_DAMAGE_GISSMO_Object
hasMaterial
https://w3id.org/steel/ProcessOntology/hasMaterial_Object
hasOriginalGaugeLength
https://w3id.org/steel/ProcessOntology/hasOriginalGaugeLength_Object
hasFormingLimitCurve
https://w3id.org/steel/ProcessOntology/hasFormingLimitCurve_Object
hasEvaluationMethod
https://w3id.org/steel/ProcessOntology/hasEvaluationMethod_Object
hasSpecificPlasticWorkValue
https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWorkValue_Object
hasBrinellHardnessCRMAverage
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessCRMAverage_Object
hasNominalEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasNominalEngineeringStrainRate_Object
hasSerialNumber
https://w3id.org/steel/ProcessOntology/hasSerialNumber_Object
hasElongation
https://w3id.org/steel/ProcessOntology/hasElongation_Object
hasMatPiecewiseLinearPlasticityLogInterpolation
https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticityLogInterpolation_Object
hasTestingDirection
https://w3id.org/steel/ProcessOntology/hasTestingDirection_Object
hasMaterialInstabilityStrain
https://w3id.org/steel/ProcessOntology/hasMaterialInstabilityStrain_Object
hasEngineeringStress
https://w3id.org/steel/ProcessOntology/hasEngineeringStress_Object
hasDisplacement
https://w3id.org/steel/ProcessOntology/hasDisplacement_Object
hasMatTabulatedJohnsonCook
https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCook_Object
hasSpecificHeatCapacity
https://w3id.org/steel/ProcessOntology/hasSpecificHeatCapacity_Object
hasFailureStrainIdentifier4MeshDependency
https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier4MeshDependency_Object
hasForceAtFracture
https://w3id.org/steel/ProcessOntology/hasForceAtFracture_Object
hasBoundaryFile
https://w3id.org/steel/ProcessOntology/hasBoundaryFile_Object
hasMajorTrueStrain
https://w3id.org/steel/ProcessOntology/hasMajorTrueStrain_Object
hasHomogenizationModel
https://w3id.org/steel/ProcessOntology/hasHomogenizationModel_Object
hasEffectiveStress
https://w3id.org/steel/ProcessOntology/hasEffectiveStress_Object
hasFEMSolver
https://w3id.org/steel/ProcessOntology/hasFEMSolver_Object
hasWidthAfterFracture1
https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture1_Object
hasTruePlasticThicknessStrain
https://w3id.org/steel/ProcessOntology/hasTruePlasticThicknessStrain_Object
hasStress
https://w3id.org/steel/ProcessOntology/hasStress_Object
hasDataSamplingFrequency
https://w3id.org/steel/ProcessOntology/hasDataSamplingFrequency_Object
hasAbsoluteCrossheadTravel
https://w3id.org/steel/ProcessOntology/hasAbsoluteCrossheadTravel_Object
hasRadiusDie
https://w3id.org/steel/ProcessOntology/hasRadiusDie_Object
hasPercentagePermanentElongation
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentElongation_Object
hasCalibrationStatus
https://w3id.org/steel/ProcessOntology/hasCalibrationStatus_Object
hasMildSteel
https://w3id.org/steel/ProcessOntology/hasMildSteel_Object
hasTotalAverageDiameter
https://w3id.org/steel/ProcessOntology/hasTotalAverageDiameter_Object
hasTargetClampingForce
https://w3id.org/steel/ProcessOntology/hasTargetClampingForce_Object
hasWidth
https://w3id.org/steel/ProcessOntology/hasWidth_Object
hasRollingDirection
https://w3id.org/steel/ProcessOntology/hasRollingDirection_Object
hasFailureStrainIdentifier
https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier_Object
hasMaximumForceNoDiscontinousYielding
https://w3id.org/steel/ProcessOntology/hasMaximumForceNoDiscontinousYielding_Object
hasPoissonsRatio
https://w3id.org/steel/ProcessOntology/hasPoissonsRatio_Object
hasPercentageTotalExtensionAtFracture
https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtFracture_Object
hasTestingMachineUncertainty
https://w3id.org/steel/ProcessOntology/hasTestingMachineUncertainty_Object
hasElementDeletionTreatment
https://w3id.org/steel/ProcessOntology/hasElementDeletionTreatment_Object
hasUser
https://w3id.org/steel/ProcessOntology/hasUser_Object
has Step
https://w3id.org/steel/ProcessOntology/hasStep
hasShearLengthAfterFracture2
https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture2_Object
hasTestPieceProcessing
https://w3id.org/steel/ProcessOntology/hasTestPieceProcessing_Object
hasExtensionMeasuringSystem
https://w3id.org/steel/ProcessOntology/hasExtensionMeasuringSystem_Object
hasTestPieceProducer
https://w3id.org/steel/ProcessOntology/hasTestPieceProducer_Object
hasIndenterIdentifier
https://w3id.org/steel/ProcessOntology/hasIndenterIdentifier_Object
is related to
https://w3id.org/steel/ProcessOntology/related
hasCRMUncertainty
https://w3id.org/steel/ProcessOntology/hasCRMUncertainty_Object
hasPunchVelocity
https://w3id.org/steel/ProcessOntology/hasPunchVelocity_Object
hasEulerAngle3
https://w3id.org/steel/ProcessOntology/hasEulerAngle3_Object
hasInnerDiameterDie
https://w3id.org/steel/ProcessOntology/hasInnerDiameterDie_Object
hasRadiusCurvature
https://w3id.org/steel/ProcessOntology/hasRadiusCurvature_Object
hasOriginalCrosssection
https://w3id.org/steel/ProcessOntology/hasOriginalCrosssection_Object
hasInitialDisplacementRate
https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRate_Object
hasThicknessAfterFracture2
https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture2_Object
hasBrinellHardnessStandardDeviation
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessStandardDeviation_Object
hasFLCDetermination
https://w3id.org/steel/ProcessOntology/hasFLCDetermination_Object
hasBatchNumber
https://w3id.org/steel/ProcessOntology/hasBatchNumber_Object
hasInteractionMatrix
https://w3id.org/steel/ProcessOntology/hasInteractionMatrix_Object
hasDiscretization
https://w3id.org/steel/ProcessOntology/hasDiscretization_Object
hasDiameter
https://w3id.org/steel/ProcessOntology/hasDiameter_Object
has test property
https://w3id.org/steel/ProcessOntology/hasTestProperty
hasDieTool
https://w3id.org/steel/ProcessOntology/hasDieTool_Object
hasTester
https://w3id.org/steel/ProcessOntology/hasTester_Object
hasTestingRate
https://w3id.org/steel/ProcessOntology/hasTestingRate_Object
hasSampleCode
https://w3id.org/steel/ProcessOntology/hasSampleCode_Object
hasMicroalloyedSteel
https://w3id.org/steel/ProcessOntology/hasMicroalloyedSteel_Object
has standard
https://w3id.org/steel/ProcessOntology/hasStandard
hasFrameRate
https://w3id.org/steel/ProcessOntology/hasFrameRate_Object
hasFormingLimitDiagram
https://w3id.org/steel/ProcessOntology/hasFormingLimitDiagram_Object
hasNumberGrains
https://w3id.org/steel/ProcessOntology/hasNumberGrains_Object
has testing facility
https://w3id.org/steel/ProcessOntology/hasTestingFacility
hasTestTemperature
https://w3id.org/steel/ProcessOntology/hasTestTemperature_Object
hasProofStrength_1Percentage
https://w3id.org/steel/ProcessOntology/hasProofStrength_1Percentage_Object
hasTestTime
https://w3id.org/steel/ProcessOntology/hasTestTime_Object
hasHardeningExponent
https://w3id.org/steel/ProcessOntology/hasHardeningExponent_Object
hasHardeningParameterTau0
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau0_Object
hasOriginalDiameter
https://w3id.org/steel/ProcessOntology/hasOriginalDiameter_Object
hasTime
https://w3id.org/steel/ProcessOntology/hasTime_Object
hasPunchDiameter
https://w3id.org/steel/ProcessOntology/hasPunchDiameter_Object
hasFailureStrainIdentifier4Temperature
https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier4Temperature_Object
hasCrystalPlasticityConstitutiveModel
https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityConstitutiveModel_Object
hasGrainNumber
https://w3id.org/steel/ProcessOntology/hasGrainNumber_Object
has project number
https://w3id.org/steel/ProcessOntology/hasProjectNumber
hasTestPiecePreparation
https://w3id.org/steel/ProcessOntology/hasTestPiecePreparation_Object
hasDiameterAfterFracture1
https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture1_Object
hasRelativeStandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/hasRelativeStandardDeviationOfTheSlope_Object
hasDrawingSpeed
https://w3id.org/steel/ProcessOntology/hasDrawingSpeed_Object
hasDamageTreatment
https://w3id.org/steel/ProcessOntology/hasDamageTreatment_Object
hasModulusOfElasticity
https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_Object
hasHCT980C
https://w3id.org/steel/ProcessOntology/hasHCT980C_Object
hasTrueStrain
https://w3id.org/steel/ProcessOntology/hasTrueStrain_Object
hasSpecimenCrossSection
https://w3id.org/steel/ProcessOntology/hasSpecimenCrossSection_Object
hasMinimumCrosssectionAfterFracture
https://w3id.org/steel/ProcessOntology/hasMinimumCrosssectionAfterFracture_Object
hasHCT980X
https://w3id.org/steel/ProcessOntology/hasHCT980X_Object
hasMachine
https://w3id.org/steel/ProcessOntology/hasMachine_Object
hasElasticConstantC11
https://w3id.org/steel/ProcessOntology/hasElasticConstantC11_Object
hasNumberSlipSystems
https://w3id.org/steel/ProcessOntology/hasNumberSlipSystems_Object
has project name
https://w3id.org/steel/ProcessOntology/hasProjectName
hasPostProcessingSoftware
https://w3id.org/steel/ProcessOntology/hasPostProcessingSoftware_Object
hasStrainRateScaleParameterP
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterP_Object
hasYieldForce_0.2Percentage
https://w3id.org/steel/ProcessOntology/hasYieldForce_0.2Percentage_Object
hasPercentagePermanentExtension
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_Object
hasCrossheadSeparationRate
https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRate_Object
hasNotchTensileStrength
https://w3id.org/steel/ProcessOntology/hasNotchTensileStrength_Object
hasHX340LAD
https://w3id.org/steel/ProcessOntology/hasHX340LAD_Object
hasSampleIdentifier-2
https://w3id.org/steel/ProcessOntology/hasSampleIdentifier-2_Object
hasElasticConstantC44
https://w3id.org/steel/ProcessOntology/hasElasticConstantC44_Object
hasSampleType
https://w3id.org/steel/ProcessOntology/hasSampleType_Object
hasForce
https://w3id.org/steel/ProcessOntology/hasForce_Object
hasDamageThreshold
https://w3id.org/steel/ProcessOntology/hasDamageThreshold_Object
hasExperimentIdentifier
https://w3id.org/steel/ProcessOntology/hasExperimentIdentifier_Object
has hdf
https://w3id.org/steel/ProcessOntology/hasHDF
hasRadius
https://w3id.org/steel/ProcessOntology/hasRadius_Object
hasDeliveryDate
https://w3id.org/steel/ProcessOntology/hasDeliveryDate_Object
hasFailureStrain
https://w3id.org/steel/ProcessOntology/hasFailureStrain_Object
hasYoungsModulus
https://w3id.org/steel/ProcessOntology/hasYoungsModulus_Object
hasFinalCriticalStrength
https://w3id.org/steel/ProcessOntology/hasFinalCriticalStrength_Object
hasElementDeletionFlag
https://w3id.org/steel/ProcessOntology/hasElementDeletionFlag_Object
hasSoftware
https://w3id.org/steel/ProcessOntology/hasSoftware_Object
hasProjectNumber
https://w3id.org/steel/ProcessOntology/hasProjectNumber_Object
hasHardeningCurve
https://w3id.org/steel/ProcessOntology/hasHardeningCurve_Object
hasGaugeLength
https://w3id.org/steel/ProcessOntology/hasGaugeLength_Object
hasSampleProduction
https://w3id.org/steel/ProcessOntology/hasSampleProduction_Object
hasCrossheadDisplacement
https://w3id.org/steel/ProcessOntology/hasCrossheadDisplacement_Object
hasLatentHardeningQ0
https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ0_Object
hasTestPieceThickness
https://w3id.org/steel/ProcessOntology/hasTestPieceThickness_Object
hasOriginalWidth
https://w3id.org/steel/ProcessOntology/hasOriginalWidth_Object
hasPercentageExtension
https://w3id.org/steel/ProcessOntology/hasPercentageExtension_Object
hasAnisotropicYieldFunctionParameters
https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunctionParameters_Object
hasYieldingIdentifier
https://w3id.org/steel/ProcessOntology/hasYieldingIdentifier_Object
hasRateSensitivityOfSlip
https://w3id.org/steel/ProcessOntology/hasRateSensitivityOfSlip_Object
hasEulerAngleConvention
https://w3id.org/steel/ProcessOntology/hasEulerAngleConvention_Object
hasTangentYieldModulus
https://w3id.org/steel/ProcessOntology/hasTangentYieldModulus_Object
hasStrainRateScaleParameterC
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterC_Object
hasMeanPlasticStrainRate
https://w3id.org/steel/ProcessOntology/hasMeanPlasticStrainRate_Object
hasInv_ShearRateSensitivity
https://w3id.org/steel/ProcessOntology/hasInv_ShearRateSensitivity_Object
hasCharacteristicEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasCharacteristicEngineeringStrainRate_Object
hasTestPiece
https://w3id.org/steel/ProcessOntology/hasTestPiece_Object
hasBlankHolderForce
https://w3id.org/steel/ProcessOntology/hasBlankHolderForce_Object
hasTrueStressAtFracture
https://w3id.org/steel/ProcessOntology/hasTrueStressAtFracture_Object
hasPercentageTotalExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtMaximumForce_Object
hasStandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/hasStandardDeviationOfTheSlope_Object
hasLubricationSystem
https://w3id.org/steel/ProcessOntology/hasLubricationSystem_Object
hasTotalEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasTotalEngineeringStrain_Object
hasDX56D
https://w3id.org/steel/ProcessOntology/hasDX56D_Object
has job
https://w3id.org/steel/ProcessOntology/hasJob
hasMeasurementResolutionUncertainty
https://w3id.org/steel/ProcessOntology/hasMeasurementResolutionUncertainty_Object
hasMaximumForceDiscontinousYielding
https://w3id.org/steel/ProcessOntology/hasMaximumForceDiscontinousYielding_Object
hasFailureTreatment
https://w3id.org/steel/ProcessOntology/hasFailureTreatment_Object
hasLatentHardeningQ1
https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ1_Object
hasBrinellHardnessCRMStandardDeviation
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessCRMStandardDeviation_Object
hasDefaultValue
https://w3id.org/steel/ProcessOntology/hasDefaultValue_Object
hasFailureCriteriaTypeAdd
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd_Object
hasPercentageYieldPointExtension
https://w3id.org/steel/ProcessOntology/hasPercentageYieldPointExtension_Object
hasReferenceShearRate
https://w3id.org/steel/ProcessOntology/hasReferenceShearRate_Object
hasShearLengthAfterFracture1
https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture1_Object
hasNumberFailedIntegrationPoints
https://w3id.org/steel/ProcessOntology/hasNumberFailedIntegrationPoints_Object
hasFadingExponent
https://w3id.org/steel/ProcessOntology/hasFadingExponent_Object
hasLowerYieldStrength
https://w3id.org/steel/ProcessOntology/hasLowerYieldStrength_Object
hasForceMeasuringDevice
https://w3id.org/steel/ProcessOntology/hasForceMeasuringDevice_Object
hasLatticeStructure
https://w3id.org/steel/ProcessOntology/hasLatticeStructure_Object
hasFailureStrainIdentifier4StrainRate
https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier4StrainRate_Object
hasMeasuringRange
https://w3id.org/steel/ProcessOntology/hasMeasuringRange_Object
hasEulerAngle2
https://w3id.org/steel/ProcessOntology/hasEulerAngle2_Object
hasPreliminaryForce
https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_Object
hasMinorTrueStrain
https://w3id.org/steel/ProcessOntology/hasMinorTrueStrain_Object
hasPoissonRatio
https://w3id.org/steel/ProcessOntology/hasPoissonRatio_Object
hasParallelLength
https://w3id.org/steel/ProcessOntology/hasParallelLength_Object
hasInitialSheetThickness
https://w3id.org/steel/ProcessOntology/hasInitialSheetThickness_Object
hasThicknessAfterFracture1
https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture1_Object
hasGrid
https://w3id.org/steel/ProcessOntology/hasGrid_Object
hasAmplitudeFile
https://w3id.org/steel/ProcessOntology/hasAmplitudeFile_Object
hasPercentageElongationAfterFracture
https://w3id.org/steel/ProcessOntology/hasPercentageElongationAfterFracture_Object
hasStrainRateFormulationFlag
https://w3id.org/steel/ProcessOntology/hasStrainRateFormulationFlag_Object
hasPercentageElongation
https://w3id.org/steel/ProcessOntology/hasPercentageElongation_Object
hasSteel
https://w3id.org/steel/ProcessOntology/hasSteel_Object
hasEstimatedStrainRateOverTheParallelLength
https://w3id.org/steel/ProcessOntology/hasEstimatedStrainRateOverTheParallelLength_Object
hasTruePlasticStrain
https://w3id.org/steel/ProcessOntology/hasTruePlasticStrain_Object
hasTestPieceLength
https://w3id.org/steel/ProcessOntology/hasTestPieceLength_Object
hasDynamometerArea
https://w3id.org/steel/ProcessOntology/hasDynamometerArea_Object
hasComposition
https://w3id.org/steel/ProcessOntology/hasComposition_Object
hasHardeningLaw
https://w3id.org/steel/ProcessOntology/hasHardeningLaw_Object
hasMaximumSpeed
https://w3id.org/steel/ProcessOntology/hasMaximumSpeed_Object
hasYieldStress
https://w3id.org/steel/ProcessOntology/hasYieldStress_Object
hasTrueTotalStrain
https://w3id.org/steel/ProcessOntology/hasTrueTotalStrain_Object
hasTrueFractureStrain
https://w3id.org/steel/ProcessOntology/hasTrueFractureStrain_Object
hasCoefficientOfCorrelation
https://w3id.org/steel/ProcessOntology/hasCoefficientOfCorrelation_Object
hasHardeningParameterTheta1
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta1_Object
hasIndentationDiameterVertical
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterVertical_Object
hasUpperYieldStrength
https://w3id.org/steel/ProcessOntology/hasUpperYieldStrength_Object
hasSampleInfos
https://w3id.org/steel/ProcessOntology/hasSampleInfos_Object
hasLaboratory
https://w3id.org/steel/ProcessOntology/hasLaboratory_Object
hasNumberOfVirtualExperiments
https://w3id.org/steel/ProcessOntology/hasNumberOfVirtualExperiments_Object
hasTrueWidthStrain
https://w3id.org/steel/ProcessOntology/hasTrueWidthStrain_Object
hasInitialThickness
https://w3id.org/steel/ProcessOntology/hasInitialThickness_Object
hasMicrostructureModel
https://w3id.org/steel/ProcessOntology/hasMicrostructureModel_Object
hasDamageExponent
https://w3id.org/steel/ProcessOntology/hasDamageExponent_Object
hasDisplacementTransducer
https://w3id.org/steel/ProcessOntology/hasDisplacementTransducer_Object
hasPlasticityModel
https://w3id.org/steel/ProcessOntology/hasPlasticityModel_Object
hasTrueStress
https://w3id.org/steel/ProcessOntology/hasTrueStress_Object
hasSpecificPlasticWork
https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWork_Object
hasWork
https://w3id.org/steel/ProcessOntology/hasWork_Object
hasInitialHardening
https://w3id.org/steel/ProcessOntology/hasInitialHardening_Object
hasTruePlasticStrainAtFracture
https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainAtFracture_Object
hasCalibrationComponents
https://w3id.org/steel/ProcessOntology/hasCalibrationComponents_Object
hasBiaxialStress
https://w3id.org/steel/ProcessOntology/hasBiaxialStress_Object
hasEbsdFileName
https://w3id.org/steel/ProcessOntology/hasEbsdFileName_Object
hasInnerDiameterBlankHolder
https://w3id.org/steel/ProcessOntology/hasInnerDiameterBlankHolder_Object
hasMaximumForce
https://w3id.org/steel/ProcessOntology/hasMaximumForce_Object
hasPistonSpeed
https://w3id.org/steel/ProcessOntology/hasPistonSpeed_Object
hasCrystalPlasticityParameterFile
https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityParameterFile_Object
hasPlasticEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasPlasticEngineeringStrain_Object
hasFinalGaugeLengthAfterFracture
https://w3id.org/steel/ProcessOntology/hasFinalGaugeLengthAfterFracture_Object
hasSheetThickness
https://w3id.org/steel/ProcessOntology/hasSheetThickness_Object
hasResultsFile
https://w3id.org/steel/ProcessOntology/hasResultsFile_Object
hasMassDensity
https://w3id.org/steel/ProcessOntology/hasMassDensity_Object
hasTestPieceComposition
https://w3id.org/steel/ProcessOntology/hasTestPieceComposition_Object
hasShearLength
https://w3id.org/steel/ProcessOntology/hasShearLength_Object
hasTestTemperatur
https://w3id.org/steel/ProcessOntology/hasTestTemperatur_Object
hasExtension
https://w3id.org/steel/ProcessOntology/hasExtension_Object
hasFailureCriteriaTypeAdd4ElementDeletion
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4ElementDeletion_Object
hasWidthAfterFracture2
https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture2_Object
hasRemark
https://w3id.org/steel/ProcessOntology/hasRemark_Object
hasReferenceElementSize
https://w3id.org/steel/ProcessOntology/hasReferenceElementSize_Object
hasPunchDisplacement
https://w3id.org/steel/ProcessOntology/hasPunchDisplacement_Object
hasCrossHardeningParameter
https://w3id.org/steel/ProcessOntology/hasCrossHardeningParameter_Object
hasTimeDependentEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasTimeDependentEngineeringStrainRate_Object
hasClampingForce
https://w3id.org/steel/ProcessOntology/hasClampingForce_Object
hasSupplier
https://w3id.org/steel/ProcessOntology/hasSupplier_Object
hasOriginalThickness
https://w3id.org/steel/ProcessOntology/hasOriginalThickness_Object
hasMeasuringAid
https://w3id.org/steel/ProcessOntology/hasMeasuringAid_Object
hasGrade
https://w3id.org/steel/ProcessOntology/hasGrade_Object
hasTestDirection
https://w3id.org/steel/ProcessOntology/hasTestDirection_Object
hasSlipSystemNumber
https://w3id.org/steel/ProcessOntology/hasSlipSystemNumber_Object
hasEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasEngineeringStrain_Object
hasBrinellHardnessAverage
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessAverage_Object
hasYieldingIdentifierIsoThermal
https://w3id.org/steel/ProcessOntology/hasYieldingIdentifierIsoThermal_Object
hasEmpty
https://w3id.org/steel/ProcessOntology/hasEmpty_Object
hasYieldStrength
https://w3id.org/steel/ProcessOntology/hasYieldStrength_Object
hasMatTabulatedJohnsonCookLogInterpolation
https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCookLogInterpolation_Object
hasProofStrengthTotalExtension
https://w3id.org/steel/ProcessOntology/hasProofStrengthTotalExtension_Object
hasStrain
https://w3id.org/steel/ProcessOntology/hasStrain_Object
hasLocation
https://w3id.org/steel/ProcessOntology/hasLocation_Object
hasAnisotropicYieldFunction
https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunction_Object
hasTestPieceIdentifier
https://w3id.org/steel/ProcessOntology/hasTestPieceIdentifier_Object
hasFracture
https://w3id.org/steel/ProcessOntology/hasFracture_Object
hasPercentagePlasticExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/hasPercentagePlasticExtensionAtMaximumForce_Object
hasTensileTestingMachine
https://w3id.org/steel/ProcessOntology/hasTensileTestingMachine_Object
hasRepetition
https://w3id.org/steel/ProcessOntology/hasRepetition_Object
hasTransitionRadius
https://w3id.org/steel/ProcessOntology/hasTransitionRadius_Object
hasStiffnessComponent
https://w3id.org/steel/ProcessOntology/hasStiffnessComponent_Object
hasTestPieceGeometry
https://w3id.org/steel/ProcessOntology/hasTestPieceGeometry_Object
hasPermissibleUncertainty
https://w3id.org/steel/ProcessOntology/hasPermissibleUncertainty_Object
hasComplexPhaseSteel
https://w3id.org/steel/ProcessOntology/hasComplexPhaseSteel_Object
hasSampleIdentifier
https://w3id.org/steel/ProcessOntology/hasSampleIdentifier_Object
hasOriginalCrossSection
https://w3id.org/steel/ProcessOntology/hasOriginalCrossSection_Object
hasMaterialIdentifier
https://w3id.org/steel/ProcessOntology/hasMaterialIdentifier_Object
hasElasticityModel
https://w3id.org/steel/ProcessOntology/hasElasticityModel_Object
hasIndentationDiameterHorizontal
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterHorizontal_Object
hasOperator
https://w3id.org/steel/ProcessOntology/hasOperator_Object
hasInitialCriticalStrength
https://w3id.org/steel/ProcessOntology/hasInitialCriticalStrength_Object
hasMinTimeStep4ElementDel
https://w3id.org/steel/ProcessOntology/hasMinTimeStep4ElementDel_Object
hasComputerControlledTensileTestingMachine
https://w3id.org/steel/ProcessOntology/hasComputerControlledTensileTestingMachine_Object
hasTotalLength
https://w3id.org/steel/ProcessOntology/hasTotalLength_Object
has typical unit
https://w3id.org/steel/ProcessOntology/hasTypicalUnit
hasPressureChamber
https://w3id.org/steel/ProcessOntology/hasPressureChamber_Object
hasTestStandard
https://w3id.org/steel/ProcessOntology/hasTestStandard_Object
hasPermanentSetStrength
https://w3id.org/steel/ProcessOntology/hasPermanentSetStrength_Object
hasMeanEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasMeanEngineeringStrainRate_Object
hasBrinellHardness
https://w3id.org/steel/ProcessOntology/hasBrinellHardness_Object
hasGridSize
https://w3id.org/steel/ProcessOntology/hasGridSize_Object
hasEulerAngle1
https://w3id.org/steel/ProcessOntology/hasEulerAngle1_Object
hasTrueFractureStress
https://w3id.org/steel/ProcessOntology/hasTrueFractureStress_Object
hasMaterialClass
https://w3id.org/steel/ProcessOntology/hasMaterialClass_Object
hasTestingFacility
https://w3id.org/steel/ProcessOntology/hasTestingFacility_Object
hasTensileStrength
https://w3id.org/steel/ProcessOntology/hasTensileStrength_Object
hasProofStrengthPlasticExtension
https://w3id.org/steel/ProcessOntology/hasProofStrengthPlasticExtension_Object
has a sub job
https://w3id.org/steel/ProcessOntology/hasSubJob
hasStrainRate
https://w3id.org/steel/ProcessOntology/hasStrainRate_Object
hasDualPhaseSteel
https://w3id.org/steel/ProcessOntology/hasDualPhaseSteel_Object
hasMeasuringDevice
https://w3id.org/steel/ProcessOntology/hasMeasuringDevice_Object
hasWidthStrain
https://w3id.org/steel/ProcessOntology/hasWidthStrain_Object
hasStressRate
https://w3id.org/steel/ProcessOntology/hasStressRate_Object
hasExtensometerGaugeLength
https://w3id.org/steel/ProcessOntology/hasExtensometerGaugeLength_Object
hasHardeningParameterTau1
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau1_Object
hasSlopeElasticPartStressStrainCurve
https://w3id.org/steel/ProcessOntology/hasSlopeElasticPartStressStrainCurve_Object
hasIndentationDiameterAverage
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterAverage_Object
hasBrinellHardnessUncertainty
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessUncertainty_Object
hasEffecticStrain
https://w3id.org/steel/ProcessOntology/hasEffecticStrain_Object
hasReferenceTemperature
https://w3id.org/steel/ProcessOntology/hasReferenceTemperature_Object
hasSpecimenWidth
https://w3id.org/steel/ProcessOntology/hasSpecimenWidth_Object
hasIdentifier
https://w3id.org/steel/ProcessOntology/hasIdentifier_Object
hasHardeningParameterTheta0
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta0_Object
Datatype Properties
has ReferenceShearRate
https://w3id.org/steel/ProcessOntology/hasReferenceShearRate_PER-SEC
has Width
https://w3id.org/steel/ProcessOntology/hasWidth_MilliM
has LatticeStructure
https://w3id.org/steel/ProcessOntology/hasLatticeStructure
has NumberSlipSystems
https://w3id.org/steel/ProcessOntology/hasNumberSlipSystems_UNITLESS
has AnisotropicYieldFunctionParameters
https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunctionParameters
has BlankHolderForce
https://w3id.org/steel/ProcessOntology/hasBlankHolderForce_KiloN
has ForceMeasuringSystem
https://w3id.org/steel/ProcessOntology/hasForceMeasuringSystem
has TrueTotalStrain
https://w3id.org/steel/ProcessOntology/hasTrueTotalStrain_UNITLESS
has Work
https://w3id.org/steel/ProcessOntology/hasWork_KiloJ
has MinTimeStep4ElementDel
https://w3id.org/steel/ProcessOntology/hasMinTimeStep4ElementDel_SEC
has Grid
https://w3id.org/steel/ProcessOntology/hasGrid
input
https://w3id.org/steel/ProcessOntology/input
has SampleCode
https://w3id.org/steel/ProcessOntology/hasSampleCode
has PercentageTotalExtensionAtFracture
https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtFracture_PERCENT
has ElasticityModel
https://w3id.org/steel/ProcessOntology/hasElasticityModel
has ExperimentIdentifier
https://w3id.org/steel/ProcessOntology/hasExperimentIdentifier
has EulerAngle3
https://w3id.org/steel/ProcessOntology/hasEulerAngle3
has PostProcessingSoftware
https://w3id.org/steel/ProcessOntology/hasPostProcessingSoftware
has Force
https://w3id.org/steel/ProcessOntology/hasForce_N
has ShearLengthAfterFracture2
https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture2_MilliM
has MajorTrueStrain
https://w3id.org/steel/ProcessOntology/hasMajorTrueStrain
has ForceMeasuringDevice
https://w3id.org/steel/ProcessOntology/hasForceMeasuringDevice
has MassDensity
https://w3id.org/steel/ProcessOntology/hasMassDensity_GM-PER-CentiM3
has DamageThreshold
https://w3id.org/steel/ProcessOntology/hasDamageThreshold_UNITLESS
has MeanEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasMeanEngineeringStrainRate_PER-SEC
has InnerDiameterDie
https://w3id.org/steel/ProcessOntology/hasInnerDiameterDie_MilliM
has PlasticEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasPlasticEngineeringStrain_PERCENT
has HX340LAD
https://w3id.org/steel/ProcessOntology/hasHX340LAD
has PercentagePermanentElongation
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentElongation_PERCENT
has RadiusCurvature
https://w3id.org/steel/ProcessOntology/hasRadiusCurvature_MilliM
has DeliveryDate
https://w3id.org/steel/ProcessOntology/hasDeliveryDate
has ThicknessAfterFracture2
https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture2_MilliM
has MaximumForce
https://w3id.org/steel/ProcessOntology/hasMaximumForce_KiloN
has ComplexPhaseSteel
https://w3id.org/steel/ProcessOntology/hasComplexPhaseSteel
has MildSteel
https://w3id.org/steel/ProcessOntology/hasMildSteel
has HCT980X
https://w3id.org/steel/ProcessOntology/hasHCT980X
has Tester
https://w3id.org/steel/ProcessOntology/hasTester
has PercentageTotalExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtMaximumForce_PERCENT
has EulerAngleConvention
https://w3id.org/steel/ProcessOntology/hasEulerAngleConvention
has PercentageExtension
https://w3id.org/steel/ProcessOntology/hasPercentageExtension_UNITLESS
has Diameter
https://w3id.org/steel/ProcessOntology/hasDiameter_MilliM
has CrossheadSeparationRate
https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRate_MilliM-PER-SEC
has BatchNumber
https://w3id.org/steel/ProcessOntology/hasBatchNumber
has StrainRateScaleParameterP
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterP_UNITLESS
has EngineeringStrain
https://w3id.org/steel/ProcessOntology/hasEngineeringStrain_PERCENT
has typical unit label
https://w3id.org/steel/ProcessOntology/hasTypicalUnitLabel
has unit label
https://w3id.org/steel/ProcessOntology/hasUnitLabel
has TruePlasticStrain
https://w3id.org/steel/ProcessOntology/hasTruePlasticStrain_UNITLESS
has OriginalDiameter
https://w3id.org/steel/ProcessOntology/hasOriginalDiameter_MilliM
has ProofStrength_1Percentage
https://w3id.org/steel/ProcessOntology/hasProofStrength_1Percentage_MegaPA
has MeasuringDevice
https://w3id.org/steel/ProcessOntology/hasMeasuringDevice
has RateSensitivityOfSlip
https://w3id.org/steel/ProcessOntology/hasRateSensitivityOfSlip_UNITLESS
has PunchDiameter
https://w3id.org/steel/ProcessOntology/hasPunchDiameter_MilliM
has HardeningParameterTau0
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau0_MegaPA
has Clamping
https://w3id.org/steel/ProcessOntology/hasClamping
has DamageExponent
https://w3id.org/steel/ProcessOntology/hasDamageExponent_UNITLESS
has Steel
https://w3id.org/steel/ProcessOntology/hasSteel
output
https://w3id.org/steel/ProcessOntology/output
has AmplitudeFile
https://w3id.org/steel/ProcessOntology/hasAmplitudeFile
has SpecificPlasticWorkValue
https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWorkValue
has PlasticityModel
https://w3id.org/steel/ProcessOntology/hasPlasticityModel
has EbsdFileName
https://w3id.org/steel/ProcessOntology/hasEbsdFileName
has DiameterAfterFracture1
https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture1_MilliM
metadata
https://w3id.org/steel/ProcessOntology/metadata
has SerialNumber
https://w3id.org/steel/ProcessOntology/hasSerialNumber
has TestPiece
https://w3id.org/steel/ProcessOntology/hasTestPiece
has PreliminaryForce
https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_KiloN
hasSymbolLatex
https://w3id.org/steel/ProcessOntology/hasSymbolLatex
has DieTool
https://w3id.org/steel/ProcessOntology/hasDieTool
has ModulusOfElasticity
https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_MegaPA
has TestDirection
https://w3id.org/steel/ProcessOntology/hasTestDirection
has HardeningExponent
https://w3id.org/steel/ProcessOntology/hasHardeningExponent_UNITLESS
has ElasticConstantC11
https://w3id.org/steel/ProcessOntology/hasElasticConstantC11_MegaPA
executedBy
https://w3id.org/steel/ProcessOntology/executedBy
has NumberFailedIntegrationPoints
https://w3id.org/steel/ProcessOntology/hasNumberFailedIntegrationPoints_UNITLESS
has LatentHardeningQ0
https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ0_UNITLESS
has MinimumCrosssectionAfterFracture
https://w3id.org/steel/ProcessOntology/hasMinimumCrosssectionAfterFracture_MilliM2
has MatTabulatedJohnsonCookLogInterpolation
https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCookLogInterpolation
has NotchTensileStrength
https://w3id.org/steel/ProcessOntology/hasNotchTensileStrength_MegaPA
has ReferenceShearRate
https://w3id.org/steel/ProcessOntology/hasReferenceShearRate_UNITLESS
has MaterialClass
https://w3id.org/steel/ProcessOntology/hasMaterialClass
has Discretization
https://w3id.org/steel/ProcessOntology/hasDiscretization
has ElasticConstantC44
https://w3id.org/steel/ProcessOntology/hasElasticConstantC44_MegaPA
has Radius
https://w3id.org/steel/ProcessOntology/hasRadius_MilliM
has BrinellHardnessCRMAverage
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessCRMAverage_HBW
has GaugeLength
https://w3id.org/steel/ProcessOntology/hasGaugeLength_MilliM
has CrossheadDisplacement
https://w3id.org/steel/ProcessOntology/hasCrossheadDisplacement_MilliM
has MaximumSpeed
https://w3id.org/steel/ProcessOntology/hasMaximumSpeed
has YoungsModulus
https://w3id.org/steel/ProcessOntology/hasYoungsModulus_MegaPA
has DisplacementTransducer
https://w3id.org/steel/ProcessOntology/hasDisplacementTransducer
has NumberGrains
https://w3id.org/steel/ProcessOntology/hasNumberGrains
has ForceAtFracture
https://w3id.org/steel/ProcessOntology/hasForceAtFracture
has testing facility
https://w3id.org/steel/ProcessOntology/hasTestingFacility
has OriginalWidth
https://w3id.org/steel/ProcessOntology/hasOriginalWidth_MilliM
has TruePlasticStrainAtFracture
https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainAtFracture_PERCENT
has FormingLimitCurve
https://w3id.org/steel/ProcessOntology/hasFormingLimitCurve
has TestTemperature
https://w3id.org/steel/ProcessOntology/hasTestTemperature_DEG_C
has MeanPlasticStrainRate
https://w3id.org/steel/ProcessOntology/hasMeanPlasticStrainRate_PER-SEC
has SampleIdentifier-2
https://w3id.org/steel/ProcessOntology/hasSampleIdentifier-2
has Composition
https://w3id.org/steel/ProcessOntology/hasComposition
has StrainRate
https://w3id.org/steel/ProcessOntology/hasStrainRate_PER-SEC
has TangentYieldModulus
https://w3id.org/steel/ProcessOntology/hasTangentYieldModulus_MegaPA
has LatentHardeningQ1
https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ1_UNITLESS
has BrinellHardness
https://w3id.org/steel/ProcessOntology/hasBrinellHardness_HBW
has BrinellHardnessAverage
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessAverage_HBW
has project number
https://w3id.org/steel/ProcessOntology/hasProjectNumber
has OriginalCrossSection
https://w3id.org/steel/ProcessOntology/hasOriginalCrossSection_MilliM2
has TrueStressAtFracture
https://w3id.org/steel/ProcessOntology/hasTrueStressAtFracture_MegaPA
has NominalEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasNominalEngineeringStrainRate_PER-SEC
has StandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/hasStandardDeviationOfTheSlope_MegaPA
has DX56D
https://w3id.org/steel/ProcessOntology/hasDX56D
has Machine
https://w3id.org/steel/ProcessOntology/hasMachine
has Supplier
https://w3id.org/steel/ProcessOntology/hasSupplier
has MaximumForce
https://w3id.org/steel/ProcessOntology/hasMaximumForce_N
parameters
https://w3id.org/steel/ProcessOntology/parameters
has MatTabulatedJohnsonCook
https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCook
has CoefficientOfCorrelation
https://w3id.org/steel/ProcessOntology/hasCoefficientOfCorrelation_UNITLESS
has HomogenizationModel
https://w3id.org/steel/ProcessOntology/hasHomogenizationModel
has MaximumForceNoDiscontinousYielding
https://w3id.org/steel/ProcessOntology/hasMaximumForceNoDiscontinousYielding_N
has project name
https://w3id.org/steel/ProcessOntology/hasProjectName
has TimeStamp
https://w3id.org/steel/ProcessOntology/hasTimeStamp
has PercentageReductionOfArea
https://w3id.org/steel/ProcessOntology/hasPercentageReductionOfArea_PERCENT
has CameraSystem
https://w3id.org/steel/ProcessOntology/hasCameraSystem
has Remark
https://w3id.org/steel/ProcessOntology/hasRemark
has Texture
https://w3id.org/steel/ProcessOntology/hasTexture
has FailureCriteriaTypeAdd4StrainAverage
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4StrainAverage_UNITLESS
has TestStandard
https://w3id.org/steel/ProcessOntology/hasTestStandard
has DrawingSpeed
https://w3id.org/steel/ProcessOntology/hasDrawingSpeed_MilliM-PER-MIN
has ShearLengthAfterFracture1
https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture1_MilliM
has FEMSolver
https://w3id.org/steel/ProcessOntology/hasFEMSolver
has DualPhaseSteel
https://w3id.org/steel/ProcessOntology/hasDualPhaseSteel
has MeasuringAid
https://w3id.org/steel/ProcessOntology/hasMeasuringAid
has LowerYieldStrength
https://w3id.org/steel/ProcessOntology/hasLowerYieldStrength_MegaPA
has TrueFractureStrain
https://w3id.org/steel/ProcessOntology/hasTrueFractureStrain
sequence
https://w3id.org/steel/ProcessOntology/sequence
has CalibrationStatus
https://w3id.org/steel/ProcessOntology/hasCalibrationStatus
has SampleType
https://w3id.org/steel/ProcessOntology/hasSampleType
has DynamometerArea
https://w3id.org/steel/ProcessOntology/hasDynamometerArea_MilliM2
has ParallelLength
https://w3id.org/steel/ProcessOntology/hasParallelLength_MilliM
has InitialSheetThickness
https://w3id.org/steel/ProcessOntology/hasInitialSheetThickness_MilliM
has BrinellHardnessUncertainty
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessUncertainty_HBW
has FailureTreatment
https://w3id.org/steel/ProcessOntology/hasFailureTreatment_UNITLESS
has ThicknessAfterFracture1
https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture1_MilliM
has PreliminaryForce
https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_MegaPA
has MeasurementResolutionUncertainty
https://w3id.org/steel/ProcessOntology/hasMeasurementResolutionUncertainty_HBW
has HardeningLaw
https://w3id.org/steel/ProcessOntology/hasHardeningLaw
has EulerAngle2
https://w3id.org/steel/ProcessOntology/hasEulerAngle2
has PermissibleUncertainty
https://w3id.org/steel/ProcessOntology/hasPermissibleUncertainty_UNITLESS
has PercentageElongation
https://w3id.org/steel/ProcessOntology/hasPercentageElongation_MilliM
has ShearStrength
https://w3id.org/steel/ProcessOntology/hasShearStrength_MegaPA
has CalibrationComponents
https://w3id.org/steel/ProcessOntology/hasCalibrationComponents
has TestPieceLength
https://w3id.org/steel/ProcessOntology/hasTestPieceLength_MilliM
has LubricationSystem
https://w3id.org/steel/ProcessOntology/hasLubricationSystem
has FailureCriteriaTypeAdd4ElementDeletion
https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4ElementDeletion_UNITLESS
has ReferenceTemperature
https://w3id.org/steel/ProcessOntology/hasReferenceTemperature_K
has InventoryNumber
https://w3id.org/steel/ProcessOntology/hasInventoryNumber
has ComputerControlledTensileTestingMachine
https://w3id.org/steel/ProcessOntology/hasComputerControlledTensileTestingMachine
has YieldStress
https://w3id.org/steel/ProcessOntology/hasYieldStress_MegaPA
has StrainRateScaleParameterC
https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterC_UNITLESS
has IndentationDiameterVertical
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterVertical_MilliM
has TaylorQuinneyCoefficient
https://w3id.org/steel/ProcessOntology/hasTaylorQuinneyCoefficient_UNITLESS
has CrystalPlasticityConstitutiveModel
https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityConstitutiveModel
has Software
https://w3id.org/steel/ProcessOntology/hasSoftware
has HardeningParameterTheta1
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta1_MegaPA
has SpecificHeatCapacity
https://w3id.org/steel/ProcessOntology/hasSpecificHeatCapacity_J-Per-Gm-K
has InitialThickness
https://w3id.org/steel/ProcessOntology/hasInitialThickness_MilliM
has UpperYieldStrength
https://w3id.org/steel/ProcessOntology/hasUpperYieldStrength_MegaPA
has Identifier
https://w3id.org/steel/ProcessOntology/hasIdentifier
has ResultsFile
https://w3id.org/steel/ProcessOntology/hasResultsFile
has TestPieceProcessing
https://w3id.org/steel/ProcessOntology/hasTestPieceProcessing
has DamageTreatment
https://w3id.org/steel/ProcessOntology/hasDamageTreatment_UNITLESS
has MaximumForceDiscontinousYielding
https://w3id.org/steel/ProcessOntology/hasMaximumForceDiscontinousYielding_N
has TrueStress
https://w3id.org/steel/ProcessOntology/hasTrueStress_MegaPA
has NumberOfVirtualExperiments
https://w3id.org/steel/ProcessOntology/hasNumberOfVirtualExperiments
has EffectiveStress
https://w3id.org/steel/ProcessOntology/hasEffectiveStress_MegaPA
has TargetClampingForce
https://w3id.org/steel/ProcessOntology/hasTargetClampingForce_KiloN
has TestPiecePreparation
https://w3id.org/steel/ProcessOntology/hasTestPiecePreparation
has SheetThickness
https://w3id.org/steel/ProcessOntology/hasSheetThickness
has FormingLimitDiagram
https://w3id.org/steel/ProcessOntology/hasFormingLimitDiagram
has RelativeStandardDeviationOfTheSlope
https://w3id.org/steel/ProcessOntology/hasRelativeStandardDeviationOfTheSlope_PERCENT
has InnerDiameterBlankHolder
https://w3id.org/steel/ProcessOntology/hasInnerDiameterBlankHolder_MilliM
has TrueStrain
https://w3id.org/steel/ProcessOntology/hasTrueStrain_UNITLESS
has FrameRate
https://w3id.org/steel/ProcessOntology/hasFrameRate_PER-SEC
has PoissonsRatio
https://w3id.org/steel/ProcessOntology/hasPoissonsRatio_UNITLESS
has MatPiecewiseLinearPlasticity
https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticity
has BiaxialStress
https://w3id.org/steel/ProcessOntology/hasBiaxialStress_MegaPA
has Time
https://w3id.org/steel/ProcessOntology/hasTime_SEC
has PercentagePermanentExtension
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_UNITLESS
has TensileTestingMachine
https://w3id.org/steel/ProcessOntology/hasTensileTestingMachine
has FinalGaugeLengthAfterFracture
https://w3id.org/steel/ProcessOntology/hasFinalGaugeLengthAfterFracture_MilliM
environment
https://w3id.org/steel/ProcessOntology/environment
has ShearLength
https://w3id.org/steel/ProcessOntology/hasShearLength_MilliM
has PercentageYieldPointExtension
https://w3id.org/steel/ProcessOntology/hasPercentageYieldPointExtension_PERCENT
has Extension
https://w3id.org/steel/ProcessOntology/hasExtension_MilliM
has TestPieceIdentifier
https://w3id.org/steel/ProcessOntology/hasTestPieceIdentifier
has WidthAfterFracture2
https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture2_MilliM
has ReferenceElementSize
https://w3id.org/steel/ProcessOntology/hasReferenceElementSize_MilliM
has PunchDisplacement
https://w3id.org/steel/ProcessOntology/hasPunchDisplacement_MilliM
has Location
https://w3id.org/steel/ProcessOntology/hasLocation
has OriginalThickness
https://w3id.org/steel/ProcessOntology/hasOriginalThickness_MilliM
has GrainNumber
https://w3id.org/steel/ProcessOntology/hasGrainNumber
has ModulusOfElasticity
https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_GigaPA
has PercentageElongation
https://w3id.org/steel/ProcessOntology/hasPercentageElongation_PERCENT
has TestPieceThickness
https://w3id.org/steel/ProcessOntology/hasTestPieceThickness
steps
https://w3id.org/steel/ProcessOntology/workflowSteps
has BoundaryFile
https://w3id.org/steel/ProcessOntology/hasBoundaryFile
has DataSamplingFrequency
https://w3id.org/steel/ProcessOntology/hasDataSamplingFrequency
has PoissonRatio
https://w3id.org/steel/ProcessOntology/hasPoissonRatio_UNITLESS
has TestTime
https://w3id.org/steel/ProcessOntology/hasTestTime_SEC
has TestingDirection
https://w3id.org/steel/ProcessOntology/hasTestingDirection
has YieldStrength
https://w3id.org/steel/ProcessOntology/hasYieldStrength_MegaPA
has ProofStrengthTotalExtension
https://w3id.org/steel/ProcessOntology/hasProofStrengthTotalExtension_MegaPA
has TestPieceComposition
https://w3id.org/steel/ProcessOntology/hasTestPieceComposition
has IndenterIdentifier
https://w3id.org/steel/ProcessOntology/hasIndenterIdentifier
has Repetition
https://w3id.org/steel/ProcessOntology/hasRepetition_MilliM
has TrueWidthStrain
https://w3id.org/steel/ProcessOntology/hasTrueWidthStrain_UNITLESS
has TransitionRadius
https://w3id.org/steel/ProcessOntology/hasTransitionRadius_MilliM
has OriginalCrosssection
https://w3id.org/steel/ProcessOntology/hasOriginalCrosssection_MilliM2
has Fracture
https://w3id.org/steel/ProcessOntology/hasFracture
has MeasuringRange
https://w3id.org/steel/ProcessOntology/hasMeasuringRange
has TotalEngineeringStrain
https://w3id.org/steel/ProcessOntology/hasTotalEngineeringStrain_PERCENT
has SlipSystemNumber
https://w3id.org/steel/ProcessOntology/hasSlipSystemNumber
has Force
https://w3id.org/steel/ProcessOntology/hasForce_KiloN
has RValue
https://w3id.org/steel/ProcessOntology/hasRValue_UNITLESS
has TrueThicknessStrain
https://w3id.org/steel/ProcessOntology/hasTrueThicknessStrain
has Strain
https://w3id.org/steel/ProcessOntology/hasStrain_PERCENT
has PistonSpeed
https://w3id.org/steel/ProcessOntology/hasPistonSpeed_MilliM-PER-SEC
has IndentationDiameterHorizontal
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterHorizontal_MilliM
has HCT980C
https://w3id.org/steel/ProcessOntology/hasHCT980C
has ExtensionMeasuringSystem
https://w3id.org/steel/ProcessOntology/hasExtensionMeasuringSystem
has MicrostructureModel
https://w3id.org/steel/ProcessOntology/hasMicrostructureModel
has CharacteristicEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasCharacteristicEngineeringStrainRate_PER-SEC
has PercentagePermanentExtension
https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_PERCENT
has TestingMachineUncertainty
https://w3id.org/steel/ProcessOntology/hasTestingMachineUncertainty_UNITLESS
has EstimatedStrainRateOverTheParallelLength
https://w3id.org/steel/ProcessOntology/hasEstimatedStrainRateOverTheParallelLength_PER-SEC
has TotalLength
https://w3id.org/steel/ProcessOntology/hasTotalLength_MilliM
has CrossHardeningParameter
https://w3id.org/steel/ProcessOntology/hasCrossHardeningParameter_UNITLESS
has AnisotropicYieldFunction
https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunction
has PressureChamber
https://w3id.org/steel/ProcessOntology/hasPressureChamber_MegaPA
has PermanentSetStrength
https://w3id.org/steel/ProcessOntology/hasPermanentSetStrength_MegaPA
has InitialDisplacementRate
https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRate_MilliM-PER-SEC
has GridSize
https://w3id.org/steel/ProcessOntology/hasGridSize_MilliM
has BrinellHardnessStandardDeviation
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessStandardDeviation_HBW
has CRMUncertainty
https://w3id.org/steel/ProcessOntology/hasCRMUncertainty_UNITLESS
has CrystalPlasticityParameterFile
https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityParameterFile
has TrueFractureStress
https://w3id.org/steel/ProcessOntology/hasTrueFractureStress_MegaPA
has TensileStrength
https://w3id.org/steel/ProcessOntology/hasTensileStrength_MegaPA
has ProofStrengthPlasticExtension
https://w3id.org/steel/ProcessOntology/hasProofStrengthPlasticExtension_MegaPA
has Material
https://w3id.org/steel/ProcessOntology/hasMaterial
has MAT_ADD_DAMAGE_GISSMO
https://w3id.org/steel/ProcessOntology/hasMAT_ADD_DAMAGE_GISSMO
has ExtensometerGaugeLength
https://w3id.org/steel/ProcessOntology/hasExtensometerGaugeLength_MilliM
has EvaluationMethod
https://w3id.org/steel/ProcessOntology/hasEvaluationMethod
norm
https://w3id.org/steel/ProcessOntology/norm
has IndentationDiameterAverage
https://w3id.org/steel/ProcessOntology/hasIndentationDiameterAverage_MilliM
has SpecimenWidth
https://w3id.org/steel/ProcessOntology/hasSpecimenWidth_MilliM
has HardeningParameterTau1
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau1_MegaPA
has SlopeElasticPartStressStrainCurve
https://w3id.org/steel/ProcessOntology/hasSlopeElasticPartStressStrainCurve_MegaPA
has Inv_ShearRateSensitivity
https://w3id.org/steel/ProcessOntology/hasInv_ShearRateSensitivity_UNITLESS
has MatPiecewiseLinearPlasticityLogInterpolation
https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticityLogInterpolation
has SampleInfos
https://w3id.org/steel/ProcessOntology/hasSampleInfos
has HardeningParameterTheta0
https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta0_MegaPA
has MaterialCard
https://w3id.org/steel/ProcessOntology/hasMaterialCard
has SpecimenCrossSection
https://w3id.org/steel/ProcessOntology/hasSpecimenCrossSection
has MicroalloyedSteel
https://w3id.org/steel/ProcessOntology/hasMicroalloyedSteel
has YieldForce_0.2Percentage
https://w3id.org/steel/ProcessOntology/hasYieldForce_0.2Percentage_KiloN
has DiameterAfterFracture2
https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture2_MilliM
has FLCDetermination
https://w3id.org/steel/ProcessOntology/hasFLCDetermination
has EulerAngle1
https://w3id.org/steel/ProcessOntology/hasEulerAngle1
has TestingRate
https://w3id.org/steel/ProcessOntology/hasTestingRate
has FadingExponent
https://w3id.org/steel/ProcessOntology/hasFadingExponent_UNITLESS
has WidthChange
https://w3id.org/steel/ProcessOntology/hasWidthChange_MilliM
has SampleIdentifier
https://w3id.org/steel/ProcessOntology/hasSampleIdentifier
has Grade
https://w3id.org/steel/ProcessOntology/hasGrade
has label source
https://w3id.org/steel/ProcessOntology/hasLabelSource
has SampleProduction
https://w3id.org/steel/ProcessOntology/hasSampleProduction
has ExtensionAtFracture
https://w3id.org/steel/ProcessOntology/hasExtensionAtFracture_MilliM
has InteractionMatrix
https://w3id.org/steel/ProcessOntology/hasInteractionMatrix_UNITLESS
has PercentageElongationAfterFracture
https://w3id.org/steel/ProcessOntology/hasPercentageElongationAfterFracture_PERCENT
has TestPieceGeometry
https://w3id.org/steel/ProcessOntology/hasTestPieceGeometry
has TimeDependentEngineeringStrainRate
https://w3id.org/steel/ProcessOntology/hasTimeDependentEngineeringStrainRate_PER-SEC
has ProofStrength_0.2Percentage
https://w3id.org/steel/ProcessOntology/hasProofStrength_0.2Percentage_MegaPA
has OriginalGaugeLength
https://w3id.org/steel/ProcessOntology/hasOriginalGaugeLength_MilliM
has ElasticConstantC12
https://w3id.org/steel/ProcessOntology/hasElasticConstantC12_MegaPA
hasExampleData
https://w3id.org/steel/ProcessOntology/hasExampleData
has PercentagePlasticExtensionAtMaximumForce
https://w3id.org/steel/ProcessOntology/hasPercentagePlasticExtensionAtMaximumForce_PERCENT
has SpecificPlasticWork
https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWork
has TruePlasticThicknessStrain
https://w3id.org/steel/ProcessOntology/hasTruePlasticThicknessStrain
has BrinellHardnessCRMStandardDeviation
https://w3id.org/steel/ProcessOntology/hasBrinellHardnessCRMStandardDeviation_HBW
has StrainRateFormulationFlag
https://w3id.org/steel/ProcessOntology/hasStrainRateFormulationFlag
has Elongation
https://w3id.org/steel/ProcessOntology/hasElongation_MilliM
has PunchVelocity
https://w3id.org/steel/ProcessOntology/hasPunchVelocity_MilliM-PER-SEC
has MinimumCrossSectionAfterFracture
https://w3id.org/steel/ProcessOntology/hasMinimumCrossSectionAfterFracture_MilliM2
has User
https://w3id.org/steel/ProcessOntology/hasUser
has EffecticStrain
https://w3id.org/steel/ProcessOntology/hasEffecticStrain_UNITLESS
has Displacement
https://w3id.org/steel/ProcessOntology/hasDisplacement_MilliM
has WidthStrain
https://w3id.org/steel/ProcessOntology/hasWidthStrain_UNITLESS
has Operator
https://w3id.org/steel/ProcessOntology/hasOperator
has description citation source
https://w3id.org/steel/ProcessOntology/hasDescriptionCitationSource
has EngineeringStress
https://w3id.org/steel/ProcessOntology/hasEngineeringStress_MegaPA
has Empty
https://w3id.org/steel/ProcessOntology/hasEmpty
has TestTemperatur
https://w3id.org/steel/ProcessOntology/hasTestTemperatur
has WidthAfterFracture1
https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture1_MilliM
has MinorTrueStrain
https://w3id.org/steel/ProcessOntology/hasMinorTrueStrain
has ClampingForce
https://w3id.org/steel/ProcessOntology/hasClampingForce_N
has Laboratory
https://w3id.org/steel/ProcessOntology/hasLaboratory
has AbsoluteCrossheadTravel
https://w3id.org/steel/ProcessOntology/hasAbsoluteCrossheadTravel_MilliM
has DefaultValue
https://w3id.org/steel/ProcessOntology/hasDefaultValue
has RadiusDie
https://w3id.org/steel/ProcessOntology/hasRadiusDie_MilliM
has Stress
https://w3id.org/steel/ProcessOntology/hasStress_MegaPA
hasSymbol
https://w3id.org/steel/ProcessOntology/hasSymbol
has RollingDirection
https://w3id.org/steel/ProcessOntology/hasRollingDirection
has TotalAverageDiameter
https://w3id.org/steel/ProcessOntology/hasTotalAverageDiameter_MilliM
has HardeningCurve
https://w3id.org/steel/ProcessOntology/hasHardeningCurve
has TestPieceProducer
https://w3id.org/steel/ProcessOntology/hasTestPieceProducer